Are Harley transmissions synchronized?
They are by definition synchronized or constant mesh. But they do not have synchronizer clutches. The correct name for the style used by Harley and most other motorcycles is “Sequential Manual Transmission”. The Harley versions, and most but not all others, have dog clutches in place of the synchronizer clutches.
What’s the problem with my Harley Davidson transmission?
My bike goes into first fine, and then when shifting to higher gears it sometimes takes two or more tries to get it into gear. Any thoughts? Service was done a couple of months ago. I had a shifter spring break ($1.98) and they had to tear into the transmission to replace it.
Why do I have trouble shifting my 99 FLSTF?
Your 99 FLSTF does have the same shift pawl assembly. Often, the issue will be binding in the shift linkage due to incorrect installation. If you have trouble shifting when the bike is not running, the issue will be transmission/linkage related. If shifting is only difficult when running, the issue is clutch or drive related.
Is it OK to use automatic transmission fluid in a Harley?
As for the use of automatic transmission fluid (ATF) in Harley primary chaincases, we have heard that some riders do this, but we do not recommend this option. Again, let’s look at actual viscosity numbers to back this up. The viscosity of a typical ATF at 100°C is 7.5 centistokes.
Why does my transmission not go into first gear?
The transmission shifts up perfectly but at times when shifting down from 6th it doesn’t like to go into first gear. This doesn’t happen all the time but often enough that it is a concern. I am changing the transmission fluid to a full synthetic and am going to set the clutch cable again (was checked last fall). Any ideas as to a possible cause?
My bike goes into first fine, and then when shifting to higher gears it sometimes takes two or more tries to get it into gear. Any thoughts? Service was done a couple of months ago. I had a shifter spring break ($1.98) and they had to tear into the transmission to replace it.
Your 99 FLSTF does have the same shift pawl assembly. Often, the issue will be binding in the shift linkage due to incorrect installation. If you have trouble shifting when the bike is not running, the issue will be transmission/linkage related. If shifting is only difficult when running, the issue is clutch or drive related.
What should I do if my transmission breaks on my Harley?
The spring on the assembly can break, or sometimes the weld on the shaft breaks. This is a labor intensive job. The exhaust has to be removed, along with your entire primary drive and complete transmission gear set. It is important to replace all bearings, seals, bushings, and gaskets related to the primary & transmission along the way.
Do you need a transmission rebuild kit for a Harley Davidson?
Transmission Rebuild Kit* This addition is everything you will need to rebuild your transmission with your new double tapered roller bearing and main drive gear. — Choose Transmission Rebuild Kit — Yes, I would like a Transmission Rebuild Kit. PN TRK-CD6-2 (Add $199) [+$ 199.00] No, thank you.