Do you need a return line for a gas tank?
The two line tanks dont have the return line. You dont generally need to run a return line if youre running a mechanical pump. You do need one (highly recommmended?) if you have an electrical pump. You must vent your tank in some way or you will have fuel delivery problems.
What happens when you open Propane bottle valve?
This is a statement propane cylinder users sometimes make following the exchangeor re-fillingof their bottle. The bottle feels heavier and obviously is filled with propane but opening the valve produces no escaping gas.
Can you use an OPD valve on an unattached propane cylinder?
Unattached propane cylinders equipped with OPD valves will not allow gas to flow when the service valve (handwheel) is opened. The same is true of forklift cylinder valves. OPD Valve Design
Where are the line ports on a gas tank?
When looking at my tank, it has 4 line ports. The inlet port is on top of the tank. There is one on the drivers side pointing forward that I assume is for the charcoal canister. And there are 2 pointing forward on the passenger side of the tank.
How do you attach a fuel tank to a Dyna Glide?
Install the tank console and gauge cluster assembly. Connect all electrical harnesses before securing the console and tank trim to the fuel tank. Connect the fuel crossover line using a new length of fuel line if necessary. Re-connect the fuel gauge wiring harness. Attach the fuel supply line to the fuel tank.
How big is the gas tank on a Harley Davidson Dyna?
You’ll find the perfect style Harley Dyna gas tank to match your Dyna Bike’s individual style, and you can get the fuel storage capacity that is right for you, from 2.2 gallons to 5.1 gallons. From old school to new school looks, each Harley Dyna tank matches different petcock sizes so your individual ride setup is supported.
How do you drain a fuel tank on a Harley Davidson?
Pinching the fuel line with a set of vice-grips to block the flow of fuel can prevent unwanted spills when disconnecting the crossover fuel line. Once the line is disconnected and aimed into a funnel, undo the vice-grips to allow fuel to drain. After draining the fuel, remove the tank console and gauge cluster assembly.
The two line tanks dont have the return line. You dont generally need to run a return line if youre running a mechanical pump. You do need one (highly recommmended?) if you have an electrical pump. You must vent your tank in some way or you will have fuel delivery problems.