How to install LED lights in your Mustang gauge cluster?
Screw in the 4 T-15 Torx headed bolts to hold the cluster in place (be careful not to drop the bolts behind the cluster, you may not get them back!) ATTENTION! Don’t forget about the HEADLIGHT KNOB!
What do LED lights look like on a Mustang?
When you mix this yellowish light with a blue film, you get a green hue showing through the numbers of our clusters and dials of our controls. NOW, when you take the stock incandescent bulbs out and swap in their places the super bright, pure white LED’s and mix it with the stock blue film, you get a BLUE hue. So white and blue = blue.
When did the sequential tail light kit come out?
Then a Mustang sequential tail light kit is just the thing for you. You can install these Mustang sequential turn signals on any Mustang from 1996 to 2009, and give all those people you’re leaving in the dust a little something nice to look at.
Do you need a headlight knob on a Mustang?
YOU ONLY NEED THIS IF YOU HAVE AN AFTERMARKET HEADLIGHT KNOB! An 8mm Socket, Socket Wrench and a few LONG extensions. YOU ONLY NEED THESE IF YOU ARE PLANNING ON DOING THE HVAC CONTROL LED SWAP! MAKE SURE YOU UNPLUG THE NEGATIVE BATTERY CABLE FROM THE NEGATIVE BATTERY TERMINAL!
Can a tail light be replaced on a 2005 Mustang?
Years ago, replacing a bulb was pretty simple. Owners of 2005-2009 Mustangs will find this task is a bit more involved than in the old days, as it requires removing some trunk trim and a few retaining screws. The entire tail light assembly must then be carefully removed to gain access to the bulb sockets in the rear.
When to replace the brake light on a Ford Mustang?
What follows is a step-by-step replacement of a brake light on a 2008 Ford Mustang. For information regarding other model years, please consult your owner’s manual or contact your local Ford Dealer . To do this, you’ll need the following: The total time required is about 15 minutes.
What kind of light bulb do I need for my Ford Mustang?
Although Ford recommends using Sylvania 4057 or 4057LL, several people have reported success when using the Sylvania 3157LL bulb, which happens to be more readily accessible at local retail stores. As always, consult your owner’s manual or local Ford dealer for advice regarding the correct part.