Where is the drain plug on a Harley Davidson Dyna?
Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained. Tighten the drain plug to 18 foot-pounds with a torque wrench.
Is there an oil return drain plug adapter?
YL INC. New 10AN Turbo Oil Pan/Oil Return Drain Plug Adapter Bung Fitting no Weld . Only 1 left in stock – order soon. . . . . Only 14 left in stock – order soon. YL INC. New Turbo Oil Pan Return/Drain Plug Adapter Fitting 10AN No Welding Steel . Only 2 left in stock – order soon.
Where is the oil drain plug on a softail motorcycle?
Unscrew the engine oil drain plug with a 5/8-inch socket and a socket wrench. On Softail models the engine oil drain plug is under the right side of the motorcycle’s frame, near the rear wheel. Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan.
How do you drain oil from HD 103?
You will start by loosening your fill plug and letting it rest in the case opening. This allows for venting while blocking the opening from any potential debris that may fall into the case. Remove your drain plug and let the oil drain completely. While the HD 103 oil is draining, move on to your oil filter.
When to replace the drain plug on a Harley Davidson?
If the engine oil or transmission oil drain plug allocation becomes stripped on a touring model, the entire oil pan may need to be replaced. This holds true for, both, Twin Cams and M8 Touring models. If the primary drain plug allocation becomes stripped, the inner primary case may need replacement.
YL INC. New 10AN Turbo Oil Pan/Oil Return Drain Plug Adapter Bung Fitting no Weld . Only 1 left in stock – order soon. . . . . Only 14 left in stock – order soon. YL INC. New Turbo Oil Pan Return/Drain Plug Adapter Fitting 10AN No Welding Steel . Only 2 left in stock – order soon.
What kind of drain plug does a MerCruiser use?
Boating Accessories New Oil Drain Plugs/gaskets/washers Sierra 18-2375 Fits Mercruiser Alpha MR/Gen II Lower Units. OEM # 10-14834A1 22-67892A1 Drain Screw Magnetic Drain Screw
Can a standard oil filter be used on a Fatboy?
If you own a 2001 and newer Fat Boy, be sure that the replacement oil filter is capable of filtering down to 10 microns to accommodate the smaller oil passages used by the Twin-Cam 88 motor. Using a standard oil filter will prevent the flow of oil into the motor and will cause serious damage.
How do you change the oil in a Harley Fatboy?
Remove the oil drain plug using a socket wrench and inspect the drain plug’s O-ring for damage or tears, replacing the O-ring as necessary. Set the drain plug aside. Remove the oil filter with an oil filter wrench and discard the old filter. Allow the old oil to drain until the flow has reduced to a minimal trickle. Replace the oil drain plug.
Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained. Tighten the drain plug to 18 foot-pounds with a torque wrench.
Unscrew the engine oil drain plug with a 5/8-inch socket and a socket wrench. On Softail models the engine oil drain plug is under the right side of the motorcycle’s frame, near the rear wheel. Dyna and Touring models have their oil drain plugs under the transmission housing. Drain the engine oil into an oil pan.
Can a dirty drain plug damage a Harley?
If a drain plug is not installed straight or is installed dirty, the plug’s threaded allocation in the case can become permanently damaged. The most common way oil cases become damaged is from Harley drain plug over tightening.
How do you change the oil in a Harley Davidson?
Drain the engine oil into an oil pan. Replace the drain plug’s O-ring, then screw it into place after the oil has drained. Tighten the drain plug to 18 foot-pounds with a torque wrench. Unscrew the oil filter from the front of the engine, using an oil filter wrench. Drain any oil trapped within the filter housing into your oil pan.
How to check the oil level on a Harley Davidson?
Start the drain plug into the oil pan by hand. Snug it; and final tighten to 14 – 21 foot lbs. Now, remove your fill plug and pour 3 full quarts into the fill allocation. This is, now, a sufficient amount of oil to check your oil level.
What kind of drain plug does a Harley Davidson use?
Adapters are available for some models. (The EZ-102 will fit drain plug size 5/8″-18 UNF) (On some models 2014 & on, use A-102 adapter due to recessed oil pan) EZ Oil Drain Valve : Replaces the standard oil drain plug, making oil changes easier, saving valuable time and expenses.
When to remove oil plugs on Harley Davidson?
It is of utmost importance to remove the engine oil and transmission oil fill plugs along with the primary derby cover; either before draining the oils or before the drain plugs are reinstalled. This will help to avoid confusion as to whether or not the oil has been replenished before attempting to start the motorcycle.
How to change the oil on a Harley Davidson Street Glide?
Please try again later. Patrick from J&P Cycles shows you how to change the oil on a Harley Davidson Street Glide. Includes every step from oil drain and fill to checking levels, filter replacement as well as the tools and any replacement parts you may need. For this particular application we used the Milwaukee Twins oil change kit.
What causes an oil pan to be damaged on a Harley?
The most common way oil cases become damaged is from Harley drain plug over tightening. If the engine oil or transmission oil drain plug allocation becomes stripped on a touring model, the entire oil pan may need to be replaced.