How do you remove a tail light lens?
Step 1: Switch on the turn signals. Switch on the turn signals again to ensure you know which bulb to remove. Step 2: Switch off the turn signals. Turn the turn signals off and switch off the ignition. Step 3: Remove the retaining screws. Open the trunk or hatch. Locate the tail light lens retaining screws or wingnuts and remove them.
How do you remove a turn signal bulb?
Detailed instructions on rear turn signal bulb removal can be found in either your owner’s manual or the factory repair manual. Step 1: Switch on the turn signals. Switch on the turn signals again to ensure you know which bulb to remove. Step 2: Switch off the turn signals. Turn the turn signals off and switch off the ignition.
How do you take the plug out of a headlight?
For a plastic catch, you’ll see a little lever sticking up at the top of the plug. Press down with your thumb while pulling firmly but gently. It should slide off. For a metal clip, pull up and away and the plug will come off in your hand.
How do you change a glass headlight bulb?
Before you take the new bulb out of the packaging, grab a tissue or a clean rag. If you must touch the glass of the bulb, do so using the tissue or rag. If the oils on your skin get on the glass bulb, it can burn out as soon as you turn on your headlight. Holding the bulb’s plug end, stick it into the back of the headlight.
Where to replace the headlight bulbs on an Isuzu Trooper?
The Isuzu Trooper uses 9004-type bulbs for both the high beams and low beams; they can be purchased at most auto parts stores. The bulb replacement procedure should take you about 15 minutes. Turn off the Isuzu engine and open the hood.
How to replace a head light bulb on an Isuzu Rodeo?
Complete instructions for replacing a head light bulb on a 2001 Isuzu Rodeo LS 3.2L V6 About Us Maintenance Parts & Tools Contact English SpanishFrench Search Home Isuzu Rodeo 2001 Lights / Headlight (replace bulb) Headlight Change 1998-2004 Isuzu Rodeo 1. Getting Started – Prepare for the repair Learn More > 2.
Can a headlight be burnt out on an Isuzu?
In some Isuzus, the highbeam is the same bulb as the headlight and it is possible for the highbeam to work, but the headlight be burnt out even if they are the same bulb (and vise versa). Some Isuzus have high intensity discharge headlights, sometimes referred to as xenon lights.
How do you replace an electric light bulb?
With a clean rag wrapped around the bulb, install it into the assembly. Reattach the rubber cap by rotating it clockwise. Reconnect the electric connector. Reconnect the battery and close the hood. You should never replace a bulb without a clean rag or gloves. Oils from your bare hands can damage the bulb.