Menu

Navigation

How do you reset the pin on a 2009 Harley-Davidson?

Posted on by Arif Clayton

How do you reset the pin on a 2009 Harley-Davidson?

  1. Turn the IGN key to IGNITION and immediately hold both turn signal switches until 5 dashes appear in the odometer window.
  2. Enter the first digit of your PIN by pressing the LEFT turn signal switch (X) times.
  3. Press the RIGHT turn signal switch 1 time to move to the next digit.

How to disarm a Harley Davidson no key fob?

Within three seconds, simultaneously press both the left and the right turn signal switches. After the turn signals flash once, the system enters the transport mode. With the fob removed, the motorcycle can be moved without setting off the alarm. With the fob present, turn the ignition switch to IGNITION to disarm the system. 1.

How to disarm HD security alarm when key fob is flat?

Follow these instruction or watch the video at the end of the article to learn how to disarm the Harley-Davidson security alarm when key FOB is flat. Sometimes this procedure is called setting or changing Harley-Davidson security system alarm override PIN number.

Can a security FOB be changed on a new Harley Davidson?

If you bought your bike new from the dealer, this information should have been given to you, but that is not always the case. If your bike has security, as well as the fob it can have a backup PIN. It will be a five-digit number that your local dealer can change or set for you using the Digital Tech system.

How many digits are in the Harley key fob?

The TSSM code consists of five digits. Each digit can be any number from 1 to 9. The personal code must be used to disarm the security system in case the Harley key FOB becomes unavailable. Harley uses the same five digit pin for all TSSM equipped motorcycles.

What happens if you lose your security FOB on a Harley Davidson?

If you have a security-equipped Harley-Davidson, you know that without your key fob present, the bike will not start. What you should also know is your PIN number, just in case you lose your key fob mid-ride. If you bought your bike new from the dealer, this information should have been given to you, but that is not always the case.

How does the key fob work on a Harley Davidson?

The Harley Davidson Touring comes with a key fob, and even though you don’t need a remote to lock and unlock the doors on a motorcycle, it works as a security system. When you lock your Harley using your key fob, the security system activates, which means you won’t be able to start the bike again without pressing the key fob.

How to disarm the Smart Security system on a Harley Davidson?

Also, with the battery disconnected in the fob I can keep the fob in one of the bike’s bags without worrying that it’s deactivated the alarm should someone get any ideas of rolling away with it. Every once in a while I use the PIN to disarm the system to help me remember what the PIN is.

What to do if your key fob is not working?

If the key fob is still not working, move on to Step 3. Resetting the key fob will work as if you have bought a new key fob, but only on certain year bikes; usually 2007 and older. If you’ve never changed the security code, it comes automatically factory set as 7-7-7-7-7.

How do you reset the PIN on a 2009 Harley-Davidson?

Posted on by Arif Clayton

How do you reset the PIN on a 2009 Harley-Davidson?

  1. Turn the IGN key to IGNITION and immediately hold both turn signal switches until 5 dashes appear in the odometer window.
  2. Enter the first digit of your PIN by pressing the LEFT turn signal switch (X) times.
  3. Press the RIGHT turn signal switch 1 time to move to the next digit.

Is there a way to disarm the skip alarm?

OK so the skip finally disabled the security system, Chopper thanks for the run/off switch advice. Jerryw618, I had to remove the brand new battery from the FOB and turn the key to the “accessory” position in order to get the system to disarm. Guess what?

How to disarm the Smart Security system on a Harley Davidson?

Also, with the battery disconnected in the fob I can keep the fob in one of the bike’s bags without worrying that it’s deactivated the alarm should someone get any ideas of rolling away with it. Every once in a while I use the PIN to disarm the system to help me remember what the PIN is.

Can a security system disarm a bike?

Your security system will disarm the bike and it cannot be started without deactivating the system first. This applies to systems using the button type security fob only. See further down the page for later button less models.

What’s the code for disarm on a Harley Davidson?

Button fob twice instead of right signal. Let’s assume for simplicity that your code is set at 31313 and you wish to use the manual disarm of the security system using the directional switches as if you lost your fob and cannot disarm the system.

Your security system will disarm the bike and it cannot be started without deactivating the system first. This applies to systems using the button type security fob only. See further down the page for later button less models.

What happens if you lose your security FOB on a Harley Davidson?

If you have a security-equipped Harley-Davidson, you know that without your key fob present, the bike will not start. What you should also know is your PIN number, just in case you lose your key fob mid-ride. If you bought your bike new from the dealer, this information should have been given to you, but that is not always the case.

OK so the skip finally disabled the security system, Chopper thanks for the run/off switch advice. Jerryw618, I had to remove the brand new battery from the FOB and turn the key to the “accessory” position in order to get the system to disarm. Guess what?

Is there a way to disarm a Harley Davidson alarm?

Otherwise pressing both the signals just turns on your 4 way flashers. Also if you got a owners manual with the bike in the back of the book it has a couple of punch out cards telling you how to manually disarm as well as a card to tell you how to put the bike in transport mode for trailering. Are you sure the the security system is the problem?