What is Harley Transport Mode?
The transport mode is used for moving the vehicle or trans- porting on a trailer with the security system armed and with- out tripping the alarm. When the vehicle is in the transport mode, the security system does not respond to motion detection.
How do you turn off the turn signal on a Harley Davidson?
With an assigned fob within range, turn the ignition switch to IGNITION. Before the security system lamp goes out, turn the ignition switch to OFF. Within three seconds, simultaneously press both the left and the right turn signal switches.
When does a Harley Davidson alarm go off?
If you’ve got a Harley-Davidson equipped with a security system, your motorcycle’s motion sensors are going to trigger the alarm when it senses that it’s being moved. After 600 miles or so in the back of that trailer, all those blinking lights will have run your battery dry.
How to turn off the alarm on a V-twin?
* Turn IGN key to ON and set OFF/RUN switch to OFF. * Turn IGN key to ACC. * Press both turn switches. Turn signals will flash once. * Turn IGN to OFF. The systen responds with 3 turn signal flashes. * With fob present, turn IGN to ON. * Set OFF/RUN switch to RUN to exit transport mode. This info is straight out of the owners manual.
How to disable Harley Davidson factory security and use?
Learn how to use your unique 5 digit pin code to disable the electronic security that cuts your ignition out. This commonly unknown technique can save you from being stranded out on the road due to a dead key fob battery. Also transport your bike without having the fob within range to prevent the turn signals from flashing constantly. Loading…
Why does my security alarm go off on my Harley Davidson?
Believe it or not, it actually happens more often than you’d think- and here’s why: If you’ve got a Harley-Davidson equipped with a security system, your motorcycle’s motion sensors are going to trigger the alarm when it senses that it’s being moved.
With an assigned fob within range, turn the ignition switch to IGNITION. Before the security system lamp goes out, turn the ignition switch to OFF. Within three seconds, simultaneously press both the left and the right turn signal switches.
How to reset the security system on a Harley Davidson touring?
With a proximity fob system, press the left turn signal switch three times and the right turn signal switch once. The blinkers will flash and the PIN should appear in the odometer window. With a push button fob, press the left turn signal three times, then the key fob twice, and the PIN will appear.
How to set or change a Harley-Davidson security system Pin code?
Here is how to set or change a Harley-Davidson Security System Alarm Override PIN code. With the newer HD Security Systems using proximity FOBs where the key FOB needs to be close to the bike for it to start, this is now more important then ever.