What kind of oil do you use in Kawasaki Prairie 360?
Use only specific fuels and fluids when servicing the Prairie 360. The quad takes unleaded gasoline. Kawasaki recommends fuel with an octane rating of 87 or higher. Additionally, use only SAE 10W-40 engine oil and Mobil Fluid 424 or Exxon Hydraulic 560 final gear case oil.
When did the Kawasaki Prairie 360 come out?
Kawasaki first released its Prairie 360 utility quad in 2003. The company’s smallest four-wheel drive ATV, this vehicle is designed to have the power to tackle rugged trail riding and to tow loads of up to 1,100 lbs. Each model is powered by a 362 cc air-cooled engine.
What to do if spark plug comes out on Kawasaki Prairie 360?
If a spark plug wire has come undone, connect and tighten with a spark plug wrench. Inspect the condition of the spark plug. If it appears damaged or discolored, replace with the NGK DPR8EA-9 plug recommended by Kawasaki. Check the engine oil and ensure that it is at adequate levels. If not, refill with SAE 10W40 viscosity oil. Restart the engine.
What to do if your Kawasaki Prairie 360 overheats?
If it still overheats, take to a dealer for repairs. Because specific training and tools are necessary for proper repairs, Kawasaki recommends that owners take the Prairie 360 to a certified dealer for complicated repairs or mechanical failure. When handling gasoline and inspecting the fuel system, do not smoke or work near an open flame.
Kawasaki first released its Prairie 360 utility quad in 2003. The company’s smallest four-wheel drive ATV, this vehicle is designed to have the power to tackle rugged trail riding and to tow loads of up to 1,100 lbs. Each model is powered by a 362 cc air-cooled engine.
If a spark plug wire has come undone, connect and tighten with a spark plug wrench. Inspect the condition of the spark plug. If it appears damaged or discolored, replace with the NGK DPR8EA-9 plug recommended by Kawasaki. Check the engine oil and ensure that it is at adequate levels. If not, refill with SAE 10W40 viscosity oil. Restart the engine.
What to do if prairie 360 4wheel drive goes into error?
If the belt is good you just need to adjust it if needed and reset the belt switch. The 2×4 4×4 goes into error and flashes if you turn on the ign switch with the connections on the actuators unplugged. So when you correct the belt prob you should be ready to ride.
If it still overheats, take to a dealer for repairs. Because specific training and tools are necessary for proper repairs, Kawasaki recommends that owners take the Prairie 360 to a certified dealer for complicated repairs or mechanical failure. When handling gasoline and inspecting the fuel system, do not smoke or work near an open flame.