How do I find my Yamaha R6 code?
AreStinks
- Turn the main switch to “OFF” and set the engine.
- Disconnect the wire harness coupler from.
- Simultaneously press and hold the “SELECT”
- Press the “SELECT” button to select the CO.
- After selecting “dIAG”, simultaneously press.
- Set the engine stop switch to “OFF”.
- Select the diagnostic code number that applies.
What engine does the FZ6R have?
The 600cc liquid-cooled 4-stroke in-line 4-cylinder engine is ready to respond with smooth, linear performance when the rider twists the throttle….Yamaha FZ-6R.
| Make Model | Yamaha FZ6R |
|---|---|
| Engine | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. |
| Capacity | 599 cc / 36.5 cu-in |
| Bore x Stroke | 65.5 x 44.5 mm |
How do you check codes on a Yamaha r1 2020?
Login process in diagnostic mode:
- Switch off ignition.
- Press both buttons on and keep them tidy.
- Turn the ignition, hold the button after the ignition is about 8 seconds.
- Wait inscriptions DIAG.
- Release and press both buttons together on the tidy again for 2 sec., And release.
- A [d01].
What’s the difference between the Yamaha FZ6 and Fz 6R?
A freshly engineered clutch (inner push type versus outer pull) and new crankcase castings are also part of the FZ6R. Despite being 8 lbs heavier (11 pounds in Cali), the FZ6R is said to get 43 mpg versus the 40 mpg of the FZ6.
How to change the fault code on a Yamaha motorcycle?
Turn off the ignition, the engine stop button to put in the ON position. 2. Disconnect the fuel pump connector. 3. Simultaneously press SELECT + RESET on the dashboard and not let go. 4. Turn the ignition switch (button still hold) and wait for about 8 seconds until the dashboard inscription “dIAG”.
What’s the price of a new Yamaha FZ6R Raven?
The all-black FZ6R Raven model has an MSRP of just $6,990 while the Team Yamaha Blue/White, Cadmium Yellow and Pearl White paint and graphic schemes run slightly higher at $7,090. Each color has a different graphics package – two are traditional Yamaha and two are more in line with the flashy and cool R6 designs.
How tall is the handlebar on a Ford FZ6?
The 30.9-inch saddle seat height (FZ6 is 31.3) can be raised 20mm from the stock position, while the bars can also move 20mm forward by rotating the bar mount columns with the included tool kit. Compared to the FZ6 model, the handlebar is 12mm rearward and 12mm lower. The seat position is 4mm forward and 2mm lower than the FZ6.
A freshly engineered clutch (inner push type versus outer pull) and new crankcase castings are also part of the FZ6R. Despite being 8 lbs heavier (11 pounds in Cali), the FZ6R is said to get 43 mpg versus the 40 mpg of the FZ6.
Turn off the ignition, the engine stop button to put in the ON position. 2. Disconnect the fuel pump connector. 3. Simultaneously press SELECT + RESET on the dashboard and not let go. 4. Turn the ignition switch (button still hold) and wait for about 8 seconds until the dashboard inscription “dIAG”.
The all-black FZ6R Raven model has an MSRP of just $6,990 while the Team Yamaha Blue/White, Cadmium Yellow and Pearl White paint and graphic schemes run slightly higher at $7,090. Each color has a different graphics package – two are traditional Yamaha and two are more in line with the flashy and cool R6 designs.
The 30.9-inch saddle seat height (FZ6 is 31.3) can be raised 20mm from the stock position, while the bars can also move 20mm forward by rotating the bar mount columns with the included tool kit. Compared to the FZ6 model, the handlebar is 12mm rearward and 12mm lower. The seat position is 4mm forward and 2mm lower than the FZ6.