How do you charge a Harley Davidson battery?
Allow the battery to charge completely. Disconnect the charger’s leads, negative terminal first, and slide the battery into the motorcycle’s battery tray. Connect the positive (+) wire lead first, followed by the negative (-) wire lead.
Are there any battery problems with a Harley Davidson?
With that can come some Harley Davidson charging problems. Bob shares some tips on battery replacement and upkeep. Batteries have come a long way since we shot this video.
How does the battery work on a Harley Davidson Fat Boy?
While the motor is considered the heart and soul of a Harley-Davidson Fat Boy motorcycle, it relies heavily on the battery to keep that metal heart beating. Powering everything from the lights to the ignition system, the battery’s electrical supply is refueled by the motorcycle’s charging system.
How big of a charging system do you need for a Harley Davidson?
We would suggest upgrading to at least a 32 amp charging system. It doesn’t sound like your charging system is functioning at 100 percent. Often, with age, grounds become an issue. Also, corrosion on pins & sockets. Especially on a model such as yours that has so many options.
With that can come some Harley Davidson charging problems. Bob shares some tips on battery replacement and upkeep. Batteries have come a long way since we shot this video.
What can I use to charge my Harley Davidson battery?
You can try using a good jumper wire from your battery positive post to your starter solenoid. Remove the (usually) green wire 1st. This eliminates the rest of your harness. If it still has trouble turning over, you need to address the starter, or you have created too much compression.
How do you close the battery on a Harley Davidson?
This modal can be closed by pressing the Escape key or activating the close button. Unless you have a kick-start, you’ll need a battery to get your Harley started and to keep it functional. With that can come some Harley Davidson charging problems. Bob shares some tips on battery replacement and upkeep.
Why is my Harley Davidson charging system not working?
It doesn’t sound like your charging system is functioning at 100 percent. Often, with age, grounds become an issue. Also, corrosion on pins & sockets. Especially on a model such as yours that has so many options.
Where does the charge lead go on a Harley Davidson?
The battery charge lead runs form the voltage regulator to the positive side of the battery. The AC output lead wire leads from the voltage regulator to the stator.
What to do if your Harley Davidson battery is dead?
If your Harley’sbattery is dead then you have come to the right place! This motorcycle battery finder will help you select the right battery for your Harley.
What should the voltage be on a Harley Davidson battery?
Turn the ignition and start the bike. The volts should not drop below 9.6 volts when the starter engages. Turn the throttle to rev the engine. As the engine is revved, the volts should go up to 13 or 14 volts. Identify the wires. The battery charge lead runs form the voltage regulator to the positive side of the battery.
The battery charge lead runs form the voltage regulator to the positive side of the battery. The AC output lead wire leads from the voltage regulator to the stator.
If your Harley’sbattery is dead then you have come to the right place! This motorcycle battery finder will help you select the right battery for your Harley.
How to test the battery and voltage regulator on a Harley?
Step 1. Check the voltage of the battery while it is disconnected from the bike using the multimeter. The volts should be no less than 12 volts.