How does a motorcycle neutral safety switch work?
When the bike is in neutral, the switch closes providing a current path for energizing the starting circuit cutoff relay, the side stand relay, and illuminating the neutral bulb. Perhaps if you would explain what your bike is not doing it would help.
What to do when your neutral light is not showing?
Get the wires off the neutral switch with long nose pliers, and jump them together with wire and alligator clips, or something fabricated. Turn on the key, if you get your green light it’s the neutral switch gone bad. Don’t be a moron like me and try to jump the wires with a test light.
How do you fix a bad neutral switch?
Turn on the key, if you get your green light it’s the neutral switch gone bad. Don’t be a moron like me and try to jump the wires with a test light. That won’t work. Keeping the wires jumped will get you a green light all the time.
Is it dangerous to switch the neutral wire?
The hot wire is therefore dangerous. The neutral wire is connected to ground at the breaker box, which is connected to physical ground nearby. If you switch the hot line and leave the neutral, then the whole device will be at neutral potential.
Why is my neutral on the pedestal not working?
The result was 120V, yet nothing using 120V AC power was functioning in the unit, including the 12V converter / charger unit, thus the failing battery power. However, checking from hot to neutral I had nothing. This meant the problem must be a break in the neutral path somewhere between the panel and the pedestal.
Get the wires off the neutral switch with long nose pliers, and jump them together with wire and alligator clips, or something fabricated. Turn on the key, if you get your green light it’s the neutral switch gone bad. Don’t be a moron like me and try to jump the wires with a test light.
Turn on the key, if you get your green light it’s the neutral switch gone bad. Don’t be a moron like me and try to jump the wires with a test light. That won’t work. Keeping the wires jumped will get you a green light all the time.
What does it mean if your reverse lights are not working?
Reverse lights are an important safety feature that alert pedestrians, and other drivers, that your vehicle is about to move or is moving.
Where is the neutral light on a Honda?
The neutral/reverse switch is inside the alternator cover (at the rear of the engine) .. To test it look under the right rear fender next to the alternator coupler you will see a small 2 pin coupler ..The wire colors are 1 gray (reverse) wire and 1 light green (neutral) wire ..