When to flush the brake fluid on a Harley Davidson?

When to flush the brake fluid on a Harley Davidson?

However, when performing a major scheduled service, it is important that the reservoir top cap is removed. This allows for a better view of both the fluid level and the fluid condition. On most major services the Harley brake fluid will be flushed, replenished, and the system bled.

When to add brake fluid to the reservoir?

Remember, the Harley brake fluid level in the reservoir will decrease with brake pad wear. Fluid should never need to be added or removed from the system during normal wear. Reservoir volume is adequate to provide fluid to the wear limits of the pads and rotors.

How can I check the brake fluid level?

Rear Harley brake fluid level can be inspected by viewing the fluid level through the rear master cylinder reservoir sight glass. However, when performing a major scheduled service, it is important that the reservoir top cap is removed.

Why is my dot 4 brake fluid low?

DOT 4 brake fluid is very susceptible to moisture. If the brake system is not completely sealed, the Harley brake fluid will break down and will become damaging to components like the ABS modulator, the master cylinder, and calipers. Remember, the Harley brake fluid level in the reservoir will decrease with brake pad wear.

Where does the brake fluid go in a Harley Davidson?

As you pump the brake pedal/handle, brake fluid will flow through the bleeder hose and into your jar. Continue to do this until the fluid runs clear, being sure to add fresh fluid to the master cylinder before it runs dry. Close the bleeder valve and remove the hose.

Remember, the Harley brake fluid level in the reservoir will decrease with brake pad wear. Fluid should never need to be added or removed from the system during normal wear. Reservoir volume is adequate to provide fluid to the wear limits of the pads and rotors.

When do you flush and replace brake fluid?

When you are actually flushing and replacing your brake fluid, you suck the master cylinder dry and then put new fluid in and bleed the brake system until all the old fluid is evacuated, thus having all new fluid in the brake system.

Why does DOT 4 brake fluid need to be replaced?

If the top cover gasket is damaged or warped, it is important that it is replaced. DOT 4 brake fluid is very susceptible to moisture. If the brake system is not completely sealed, the Harley brake fluid will break down and will become damaging to components like the ABS modulator, the master cylinder, and calipers.