How do you change the battery on a Softail?
If your Softail uses a battery box, remove the cover by removing the screw at the bottom of the cover. Pull outward at the top of the cover to disengage the cover clip. Figure 2. This style of seat will have nuts behind the seat. Figure 3.
Can you change the exhaust on a Harley Davidson Softail?
One of the most popular modifications you can do to your Softail is change the exhaust to your particular style. This article applies to the Harley Davidson Softail. You have the quintessential motorcycle. What more could you want?
Where is the battery located on a Harley Davidson Softail?
The battery chart. Your battery is mounted below/beside your seat. You’ll need to remove your seat and/or battery box access cover to gain access. There are many seat options available for the Softail, but most are removed similarly. Locate the mounting nuts or bolt (s) around and under the seat.
How do you remove the seat on a Harley Heritage Softail?
Reinstall the nylon washer, lower the rear of the seat onto the frame and tighten the Torx head bolt to secure the seat to the fender. Lift the loose end of the seat strap over and across the seat. Secure it in place by tightening the Torx head bolt into the strap bracket on the side of the fender.
One of the most popular modifications you can do to your Softail is change the exhaust to your particular style. This article applies to the Harley Davidson Softail. You have the quintessential motorcycle. What more could you want?
How long does it take to change the battery in a Harley Davidson Softail?
Changing the battery in a Harley-Davidson Softail is a relatively simple matter of removing the seat and disconnecting the battery terminals. It should take no more than 30 to 45 minutes to complete the process.
Where are the foot rests on a Harley Davidson Softail?
There are 9/16″ bolts on the bracket that is mounted to the same bar that supports your saddle bags if you have the Heritage Classic. For the dual exhaust setup, you will need to remove the crossover pipe from the bottom of the bike that supports the exhaust on both sides. The foot rests will also need to come off.
Can a slip on muffler be changed on a Harley?
Check with the manufacturer to be sure. http://www.fixmyhog.com/video/review-of-harley-slip-on-mufflers-by-cobra-008375/ What if I have a K&N high flow filter and change my stock pipes to a different style of stock pipes?