Where should LED strip lights go?

Where should LED strip lights go?

To level up your light design, try installing LED strips in these five places around your home.

1. Under cabinets. As the name implies, under-cabinet lighting illuminates areas underneath your cabinetry.
2. Along toe kicks.
3. Under shelves.
4. Under the bed.
5. Behind computer and TV screens.

HOW LONG CAN LED strip lights be on?

The longest continuous run will be either 16ft (5 metres), 23ft (7 metres), 32ft (10 metres), 50ft (20 metres), 65ft (20 meters) or 164ft (50 meters). You should not exceed these lengths as the LED strip will suffer a voltage drop and the brightness of the LEDs will not be constant along the strip.

Where are the LED lights on a motorcycle?

In most models of motorcycle, you will find the battery located beneath the seat. By disconnecting the battery, you can test your LED light strips without worry of harming the other motorcycle components that it powers. Test locations for your LED strips.

What should I do if my LED light stops working?

You should check the connection from the controller to the LED strip. Especially the connector between cable and LED strip has to be checked, because this connector is very sensitive. There must be a solid electrical connection to the contact surfaces of the strip.

What do you need to install LED lights?

The job will also require velcro strips (or a permanent adhesive if you prefer), additional 18- or 20-gauge electrical wire, sandpaper, pliers, screwdrivers, soldering equipment (or soldering gel), wire terminal connectors, electrical tape, and an in-line fuse. Test your LED strips.

What happens when you turn on a LED light?

In short, some LED lights can cause the rest of the lights in the vehicle to turn on when power is applied to only LED lights. This can affect anything from Headlights, and Marker Lights, to Turn Signals, and Brake Lights creating unsafe driving conditions.

Where can I get LED lights for my motorhome?

Staff are available to answer queries via phone. We are now back fully Open ! You can call us on 0845 8698940 to book vehicles in. Any none Urgent enquiries should be made via our Contact Page LED fittings for motorhomes, LED replacement kits and LED bulbs for motorhomes.

How can I connect my LED light strips to power?

There are many ways to connect your light strips to power. You can connect each strip directly to the socket, this is especially useful when lighting smaller spaces or projects. You can use LED light strip clips to make the connection. Or you can hardwire your LEDs directly to the main power source of your home or building.

You should check the connection from the controller to the LED strip. Especially the connector between cable and LED strip has to be checked, because this connector is very sensitive. There must be a solid electrical connection to the contact surfaces of the strip.

In short, some LED lights can cause the rest of the lights in the vehicle to turn on when power is applied to only LED lights. This can affect anything from Headlights, and Marker Lights, to Turn Signals, and Brake Lights creating unsafe driving conditions.