What makes a Suzuki GSX 250 four stroke?
In common with most of the new breed 250 four-strokes it is a one piece affair with a 180 degree throw which runs on plain main bearings. In other ways the Suzuki displays a high level of Japanese whiz-bang technology.
What should I remove from my Suzuki gsx250f?
Things to come off now – balance hoses between cylinders 1 and 4, and between cylinders 2 and 3, the cam cover breather hose, the throttle cable, the choke cables, and the carburettor manifold clamps need to be loosened. Balance hoses pull off easily. There’s a few more steps to undoing throttle cable.
How many valves does a Suzuki GSX750 have?
In this GSX750 engine, Suzuki have been clever and used rockers with screw and locknuts enabling them to use a camshaft that was probably designed for an eight-valve motor. Very easy to adjust, and no parts to swap over. Then we have buckets with a shim for adjustment.
What’s the top speed of a Suzuki GSX?
Top speed was a creditable 144 km/h so the GSX comes in a close third behind the RD250 Yamaha and GT250X7 Suzuki. The clutch performed admirably during the strip testing and the pipes didn’t show a trace of blueing or yellowing.
Why is my Suzuki Across making no power?
Something to consider is one of the major things that happens with Across’. The plastic holders for the throttle slides and the throttle needles snaps, and this means the slide drops into the carb and doesn’t open when you open the throttle. This means the bike makes almost no power.
Things to come off now – balance hoses between cylinders 1 and 4, and between cylinders 2 and 3, the cam cover breather hose, the throttle cable, the choke cables, and the carburettor manifold clamps need to be loosened. Balance hoses pull off easily. There’s a few more steps to undoing throttle cable.
How are the carbs on a Suzuki gsx250f?
These carbs, being vacuum (CV) style carbs, also have throttle slides which are actuated by a vacuum. Only at high RPM and full throttle will these slides be all the way open. When you first open the throttle to full throttle at low RPM, the engine will slowly lift these.
How to change throttle cable on Suzuki gsx250f?
Start by loosening the top nut on the throttle cable. Now lift the cable up a bit, and loosen the bottom nut till it is totally undone. Now you lift up the cable body fully… …then yank it sideways out of the body of the carb. Note the cutout for the inner cable to go through Choke cables get disconnected next.