What kind of connection does an oil cooler need?
In many later model radiator applications an integrated Jiffy-Tite® design is used to not only make the connection between the oil cooler and the line but also to secure the oil cooler in the radiator tank. It is these later designs that prove most troublesome in the field.
How do you install an aftermarket oil cooler?
If you are buying an aftermarket oil cooler, your kit is going to come with brackets and other accessories to help in mounting the cooler to the car. Attach the new cooler to the car, using your socket wrench to securely tighten the bolts. Then run the proper oil lines from the engine to the oil cooler, and from the cooler back to the oil filter.
How do you change the oil cooler hose?
You may find just a single line or a dual line, depending on the type of vehicle you own. Slide a drain pan underneath the oil cooler hose connection on the radiator side. Use a wrench to loosen the coupling, turning in a counterclockwise direction.
How are steel lines jointed to aluminum oil coolers?
To seal effectively, one or both sides of the joint surface must be forced to conform to the other as the joint is tightened. As parts become contaminated with corrosion and dirt it becomes even more difficult to effect leak proof connections. In many applications, steel lines and fittings are being jointed to brass or aluminum oil coolers.
In many later model radiator applications an integrated Jiffy-Tite® design is used to not only make the connection between the oil cooler and the line but also to secure the oil cooler in the radiator tank. It is these later designs that prove most troublesome in the field.
How do you replace the oil cooler line?
With the correct seals installed on the replacement oil cooler lines, go ahead and install them onto the oil cooler. Once installed, go ahead and reinstall the retaining hardware. Step 11: Install replacement oil cooler lines onto the engine side. Reinstall the replacement oil cooler lines onto the end that get mounted to the engine.
Where to mount an automatic transmission oil cooler?
1. The transmission cooler kit you purchased will include the mountingtransmission oil cooler hardware needed to mount the cooler. The cooler should be mounted ½ to 1 inch in front of the radiator or A/C condenser for vehicles with air conditioning. 2. Find the oil cooler lines.
How do you open a GM oil cooler?
Once the legs are open the line may be pulled out of the fitting. If a tool is not available to open the legs then a small screwdriver can be used to completely remove the clip from the fitting. See photos below.