How to change low beam headlight bulb on Honda Goldwing?

Cruiseman shows you how to change the low-beam headlight bulb on your 2001-2013 Honda Goldwing GL1800 or F6B. DISCLAIMER: Cruiseman’s videos are for entertainment only. You should always rely on an Authorized Honda Service Center for motorcycle maintenance and repair. If you work on your own motorcycle, you do so at your own risk.

How do you change the headlights on a GL1800?

Remove the fairing compartment from the affected side of the motorcycle. Open the compartment lid and locate the four plastic pop rivets that secure the compartment to the fairing. Remove the rivets by depressing the center of the rivet and pulling it out of the compartment. Pull the compartment free from the fairing.

How do you replace a headlight on a Harley Davidson?

Install a new H7 bulb into the headlight and latch the retaining clip over the bulb. Place the rubber dust boot over the bulb. Align the arrow marks on the headlight and rubber dust boot before pressing the it into place. Reconnect the motorcycle’s electrical connector to the bulb.

How do you replace a H7 light bulb?

Unlatch the bulb retaining clip and pull the damaged bulb out of the headlight. Install a new H7 bulb into the headlight and latch the retaining clip over the bulb. Place the rubber dust boot over the bulb. Align the arrow marks on the headlight and rubber dust boot before pressing the it into place.

How do you change a low beam headlight on a motorcycle?

Park the motorcycle on its center stand and turn the handlebars away from the faulty headlight bulb. Locate the low beam headlight bulb directly below the handlebars. Pull the electrical connector off of the headlight bulb and pull the rubber dust boot away from the headlight.

How do you remove a headlight assembly bracket?

If you have to remove any bolts from a headlight assembly bracket, make sure to keep them someplace safe until you reassemble that portion of the car. In some vehicles, you will need to unbolt the headlight assembly and slide it out of the car to access the headlight bulb itself in the back. Disconnect the wires going to the headlight.

How do you remove a headlight bulb from a car?

The headlight bulb should still be in a socket connected to wiring coming from your vehicle. Disconnect the wires by unclipping them from the bottom of the headlight bulb housing and pull on it gently to disconnect it.

Is it possible to fix a bad low beam headlight?

Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools. If replacing your headlight bulb does not work, there may be an electrical issue in your vehicle that should be addressed by a professional. Identify a blown out bulb.

What to do if you drop a low beam light bulb?

The oil on your hands can compromise the glass of the bulb, reducing its lifespan. Protect your bulb from this by wearing gloves or using a tissue any time you come into contact with the glass of the new low beam headlight bulb. Be careful not to drop the bulb as you remove it from the package.

Do you need to replace both high and low beams?

Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.

What happens if a headlight comes loose while driving?

If the wires come loose while you are driving, the headlight will stop working. The headlight bulb and assembly should now be connected to the car once again. Be careful not to yank on the assembly with it connected, as you may rip a wire out of the harness.

What are the warning lights on a Honda?

The following are warning lights and indicators found in vehicles built by Honda. Click a link to learn more about each one. They are roughly ordered by importance, which tends to be by color (red, amber, yellow, orange, green, blue, gray).

What should I do if my headlight bulb comes off?

Wipe the bulb off again with rubbing alcohol if you feel it may have come into contact with your skin, then slide it into the headlight housing. Turn the bulb assembly a quarter turn clockwise to re-secure it, or reinstall the bracket that held your headlight bulb in place.

Are there any aftermarket lights for Honda GL1800?

No matter what kind of aftermarket Honda GL1800 lights or lighting accessories you want to add, the product descriptions will tell you if it’ll fit YOUR bike. All the details on Goldwing 1800 lightsare there for your convenience.

What do I need to Mount Goldwing 1800 lights?

All the details on Goldwing 1800 lightsare there for your convenience. And keep in mind that all mounting hardware and instructions are included. Many lighting accessories attach with double sided tape, which is also provided.

How much does a Honda GL1800 rear turn signal conversion kit cost?

Item: ERRE-18-SADD Ergomot GL1800 Rear Turn Signal Conversion Kit (EC01322) Price: $17.95 Item: EC01322 Electrical Connection (in stock) Replacement Bulb for Rear Turn Signal Conversion Kit (EC01523) Price: $7.00 Item: EC01523 Electrical Connection (in stock) GL1800 LED Side Logo Accents (45-1694A) Price: $76.87

How many Honda Goldwing lights are left in stock?

Only 1 left in stock – order soon. . Only 13 left in stock (more on the way). . . Only 10 left in stock (more on the way). . Only 2 left in stock – order soon.

Where is the high beam bulb on a GL1800?

Locate the high beam bulb behind the fairing compartment’s mounting position on the fairing. Pull the wiring connector off of the bulb and remove the rubber dust boot. Unlatch the bulb’s retaining clip and pull the damaged bulb out of the headlight. Insert a new H7 bulb into the headlight’s high beam position and latch the retaining clip over it.

When to replace the headlights on a 2001 Honda Accord?

The headlights on the 2001 Honda Accord, like virtually all headlights, have a limited lifespan and will eventually burn out. The 2001 Accord has separate high beam and low beam bulbs. You should replace either type of headlight immediately after it burns out to maintain your safety while driving at night or in inclement weather.

How do you remove a headlight bulb from a light?

Squeeze the head of the electrical connector of the light you want to replace and pull away from the bulb to disconnect it from the headlight bulb. Turn the headlight bulb a quarter turn to the left and pull out to remove it from the headlight assembly. Dispose of the headlight bulb after removing it.

How to change the headlight bulb on a Honda Accord?

Driver Side Low Beam Headlight Bulb – To access the driver side low beam headlight bulb, first start the engine and turn the steering wheel all the way to the right.

How to replace a low beam headlight bulb?

Passenger Low Beam Headlight Bulb – First start the engine and turn the steering wheel all the way to the left to create some working room in front of the passenger side tire. You’ll need a small flat head screwdriver to remove three black plastic pop rivets from the fender well in front of the passenger side tire.

How to replace a headlight bulb in a 2001 Honda Civic?

A simple tutorial showing you how to replace the driver side headlight bulb in a 2001-2005 Honda Civic. While you’re under the hood, make sure to check your air filter. Here’s a tutorial for that if it needs replaced. https://www.youtube.com/watch?v=S5caS… Loading…

What to do when your low beam headlight blows out?

You can often tell when a headlight blows out while you’re driving, but confirm which bulb has actually blown out by leaving your headlights on and getting out of the vehicle to check. Then get back in your vehicle and turn on your high beams. Some vehicles use a single bulb for both high and low beams while others do not.

Why are the low beams on my car not working?

If your fuses, relays and bulbs are sound, it’s likely your steering column control switch – the “pull towards you to flash your hi-beams”, etc. one Click to expand… Is there a way I can check that myself?

Why are the low beams out on my Honda Accord?

2005 Honda Accord. Replaced the fuses even though fuse looked good. Took it in to have bulbs replaced but still did nothing. Went on vacation for about 2 weeks, car was in the garage. Came back used it first night everything fine. Next day went to turn on headlights and both were out, but high beams worked.

What are the fuses for Honda low beams?

In the fuse box, as shown in the picture: Left-low beam is fuse F1, right-low beam is F6. Also look at the two 40amp fuses, marked F15 and F19. These two 40 amp fuses feed the other fuses.

What happens when both low beam headlights go out at the same time?

The usual way it happens is one light burns out, you don’t notice, the second light burns out, now you notice. Get the multi meter out and chase some electrons, if you don’t know how then try replacing one bulb. Had it happen in my VW van, replaced the switch and I was good to go.

How does ground connection work on Honda low beams?

Connection from the vehicle grounded frame is accomplished via a wire conductor or incorporated into the circuit board’s thin film grounding conductor pattern routed through one of the hold down bolt/screw into the metal frame to achieve necessary ground connection.

What kind of headlight system do I need for Honda GL1500?

PATHFINDERLED GL1500 headlight kits are direct replacement LED bulbs for your Honda GL1500. They offer a fantastic way to increase your visibility as well as throwing a great beam down the road. Our latest generation Plug N Play LED bulbs are even easier to install than before.

Navigation