Why is my intruder clutch not working properly?
1) The hydraulic hose is expanding so much that not enough pressure is applied to work the clutch. (Possible on a bike from 1987). 2) The master cylinder and second cylinder are due for a good cleaning and overhaul. Along with cleaning an overhaul consists of replacing all of the internal rubbers.
Are there manuals for the Suzuki VS800 Intruder?
An error occurred while retrieving sharing information. Please try again later. Suzuki VS800 Intruder: manuals, parts, microfiches.
How big is the front tire on a Suzuki VS800?
Front tire size 80/90–21 48H – VS800GL (1992-1999) 100/90-19 57H – VS800GL (2000-2004) Rear tire size 140/90–15 70H Front brake Single disc, 300 mm, 2-piston caliper Rear brake Drum Fuel capacity 12,0 l / 3,2 US gal 11,0 l / 2,9 US gal – California model Reserve – 3,0 l Trail 145 mm / 5,71 in – VS800GL (1992-1999)
1) The hydraulic hose is expanding so much that not enough pressure is applied to work the clutch. (Possible on a bike from 1987). 2) The master cylinder and second cylinder are due for a good cleaning and overhaul. Along with cleaning an overhaul consists of replacing all of the internal rubbers.
What should I do if my Clutch is slipping?
Next before replacing your clutch put the bike on the center kick and get the rear tire off the ground wieght the front end so the rear tire stays in the air then put the bike in gear and run it at an idle for a while then try giving it short bursts of power and watch for slippage as the clutches work in the new oil the clutch should improve.
Why does my bike clutch stop working properly?
I have an Intruder 1400, year 2003 , and i am having problems with the clutch, it works pretty well for a while after the bike is warm enough while riding it for some time for some reason the clutch stops working properly, i have to stop and let it cool down otherwise i wont be able to ride.
Can you use car oil on a wet clutch?
The shear stability of car oil is not good enough for the gearbox of a bike and its wet clutch system . it will work for a while but then as the velocity of the oil breaks down your clutch will suffer and die . It costs more but is defiantly worth the money to always use a good quality motorcycle oil .
I have an Intruder 1400, year 2003 , and i am having problems with the clutch, it works pretty well for a while after the bike is warm enough while riding it for some time for some reason the clutch stops working properly, i have to stop and let it cool down otherwise i wont be able to ride.
How do you adjust or repair the clutch?
I have a 1997 Suzuki Intruder 800 cc that has been sitting for a couple of years and when I started it up after changing oil and filter, clean spartplugs, etc. it has the clutch slipping when I ride it. This is a hydraulic system. How do you adjust or repair the clutch?
What to do if you have a clutch problem on your motorcycle?
The easiest thing to try is loosen the master cylinder enough to shift it on the bars, turn the bars hard right, and see if you can get the fitting lower than the rest. You may need a helper to lean the bike some.