Menu

Navigation

How long do Harley Davidson key fob batteries last?

Posted on by Arif Clayton

How long do Harley Davidson key fob batteries last?

HD recommend that you replace the battery in your Harley-Davidson key FOB every 12 months.

What can I do if my fob battery is dead?

A conventional mechanical key might also be stored inside the fob. This key can open the driver’s door in case the fob battery is dead or if the main battery in a car is discharged. How can you check the fob battery? In many cars, a key fob has a little LED light that illuminates when pressing any of the fob buttons.

How to reset your car key fob after replacing the battery?

1 Turn your car’s engine off and turn the ignition to the key “run” position. 2 Press and hold the “unlock” button on your functional key fob. 3 Release both buttons simultaneously.

How to replace a Harley Davidson key fob battery?

In this tutorial we show you how to replace the battery in a Harley-Davidson key FOB. One thing you’ll need before you start is new Panasonic 2032 battery or equivalent. Category Autos & Vehicles Show moreShow less Loading… AutoplayWhen autoplay is enabled, a suggested video will automatically play next. Up next

Can a key fob be used without a battery?

In most cars, the security (immobilizer) chip inside the fob works without a battery, but only from a very close range. So even if the fob has a weak battery, it should still start the car. You may have to hold the smart fob closer to the “Start” button or insert it into a special slot to start the engine.

In this tutorial we show you how to replace the battery in a Harley-Davidson key FOB. One thing you’ll need before you start is new Panasonic 2032 battery or equivalent. Category Autos & Vehicles Show moreShow less Loading… AutoplayWhen autoplay is enabled, a suggested video will automatically play next. Up next

Is it easy to replace a key fob?

Replacing your key battery or isolating a problem with your key isn’t always simple, so let our professional associates help you with their knowledge and expertise. We can help you fix key fob issues or let you know if a replacement is the most cost-effective solution.

What kind of battery does a key fob take?

The battery on the key fob is bound to die at one point or another. Check your owner’s manual for the specific battery type that fits your key fob. Most models take 2032 batteries or equivalent. Use the thin blade to pry the key fob open.

Why does my key fob not work after replacing the battery?

Correspondingly, why does my key fob not work after replacing battery? The most common problem with these car key fobs is that the batteries just go dead over time, in which case replacing the battery should fix the problem. Take the key fob apart and check for broken contacts or misaligned buttons.

Posted In Q&A

How long do Harley-Davidson key fob batteries last?

Posted on by Arif Clayton

How long do Harley-Davidson key fob batteries last?

HD recommend that you replace the battery in your Harley-Davidson key FOB every 12 months.

Why is my Harley Davidson Ultra Classic not starting?

I have a 2010 ultra classic with ABS. It is not starting. The battery voltage is 12.75 off the battery. When I turn the main switch on, I get a drop to 12.5, and when the kill switch is turned on, I get a drop to 12.38. The self test goes out and hit the start switch with nothing – no volt drop, no starter engage, no nothing. DEAD.

Can a Harley Davidson HD start without a fob?

Starting your HD without a Fob! Your HD has the ability to be started without a Fob present jus in case the Fob is lost or the battery goes dead! Your Pin# to over-ride the security system is usually loaded up with the last 5 numbers of your Harley’s serial # backwards!

What to do if your fob battery is dead?

If the bikes signal lights flash rapidly when trying to start, insert a new 2032 fob battery. If the mcy. signal lights still flash rapidly when trying to start, turn the fob battery over and insert it correctly. The FACTORY installed alarm has it’s own battery, so it will work even if the bike battery is dead/cut/removed.

Why is the start button not working on my Harley Davidson?

If you did NOT read 12 volts, you would have to go back to the TSSM and hot wire (bypass it) in order to determine where the problem was. Also testing the start button would be something to check also. The key point to remember is that the “Start Relay Control” comes from the TSSM.

I have a 2010 ultra classic with ABS. It is not starting. The battery voltage is 12.75 off the battery. When I turn the main switch on, I get a drop to 12.5, and when the kill switch is turned on, I get a drop to 12.38. The self test goes out and hit the start switch with nothing – no volt drop, no starter engage, no nothing. DEAD.

Starting your HD without a Fob! Your HD has the ability to be started without a Fob present jus in case the Fob is lost or the battery goes dead! Your Pin# to over-ride the security system is usually loaded up with the last 5 numbers of your Harley’s serial # backwards!

What kind of battery does a Harley Davidson key fob take?

Figure 1. Harley Davidson Key Fob. The battery on the key fob is bound to die at one point or another. Check your owner’s manual for the specific battery type that fits your key fob. Most models take 2032 batteries or equivalent. Use the thin blade to pry the key fob open.

Why is my key fob not working on my Harley Davidson touring?

There are a few things that can go wrong with the key fob that would cause problems starting the Harley Davidson Touring. Read on to learn how to fix the issue. This article applies to the Harley Davidson Touring.