How big is Enduro suspension on KTM 250exc?
We took a bog standard 2015 KTM 250EXC and a very docile Vet rider (JB: 6’0”/1.82m, 14st/89kg) to a standard issue enduro test track and within five hours we had the bike completely dialed, with a set-up (and options) that would last the season – in fact for as long as the rider hypothetically kept the bike.
What are the benefits of KTM enduro suspension?
There’ll be knock-on benefits too, like less likelihood of arm pump or back strain as the rider can adopt a more natural stance. And we went one step further, adding KTM’s higher clamps, adding about 10-15mm to the bar height.
What kind of springs do you need on a KTM?
But fortunately the KTM manual gives us recommendations and again for a heavier rider you do need to fit heavier springs, this time we were upsizing from 4.2N/mm to 4.4Nm/mm springs. And for a pair of springs we’re again talking modest money, around £80 – plus fitting. Testing this it was immediately apparent that we’d rebalanced the bike.
How much does a KTM suspension set up cost?
Cost from KTM is modest, about £80. If you’ve got the tools you can fit this at home but if not any bike shop should be able to do this in no more than 15 minutes. With the shock still located in the frame it takes barely 5-minutes more – so simple is PDS.
Is the KTM 690 Enduro your an adventure bike?
The KTM 690 Enduro R is probably the most versatile adventure bike ever built. It is especially good for rally travel, but will also turn into a fairly capable adventure enduro whip. I was looking at the latter, when pulling the trigger on my 690 in 2013.
What to do with a new KTM enduro R?
I just taped up the naked wires leading to the connector and sprayed all connectors with electrical vaseline. This is best done when the bike is new so you won’t be sealing the little sand particles inside the wiring. I wrapped the electrical tape around a small socket to reach the tight spots.
Why does the KTM 690 Enduro are sound so loud?
The Unifilter also has a higher seal which should help. I changed the stock air filter cover to a KTM EVO-1 cover. It raises the air intake higher up, which is crucial in water crossings. It does make the engine sound very loud for the rider. I can’t even hear the exhaust due the induction noise.
What’s the air filter cover on a KTM enduro R?
This should do the trick as the pressure difference between ambient pressure and airbox pressure should be reduced. The Unifilter also has a higher seal which should help. I changed the stock air filter cover to a KTM EVO-1 cover. It raises the air intake higher up, which is crucial in water crossings.