How do I turn off fuel?
In the event that you need to turn off your gas service at the meter, follow these steps:
- Locate your main gas service shutoff valve.
- With a wrench, turn the lever in either direction until it is crosswise to the pipe.
- Once the gas is turned off, leave it off.
How do you shut off gas to an appliance?
You should have an appliance gas shutoff valve installed at each gas appliance that lets you turn off the gas to that appliance only, instead of shutting off all gas at the main gas service shutoff valve. To turn off the gas at the gas appliance, rotate the valve a quarter turn.
How to turn off the gas at the shutoff valve?
Instructions 1 Ventilate the Area If you smell gas, open windows to provide ventilation to the room. 2 Check the Burners Make sure all the burner controls are in the OFF position. 3 Remove the Oven Drawer Carefully pull out the drawer below the oven compartment, and empty the drawer of all contents.
What should I do if I turn off my natural gas?
CAUTION: If you turn off your natural gas at the meter, leave it off. Do not turn it back on yourself. Contact us to turn the meter back on and relight the pilots. For safety, a shut-off valve should be installed at every natural gas appliance.
What should I do if my gas meter is shut off?
Once the gas is shut off at the meter, do not try to turn it back on yourself. If the gas service shutoff valve is closed, PG&E or another qualified professional should perform a safety inspection before the gas service is restored and the appliance pilots are lit.
What to do when loading a fuel tank?
When loading, keep internal and external valves on the receiving tank open along with the pressure relief valves. When making a connection, shut off the vehicle engine. When transferring Class 3 materials, shut off the vehicle engine unless it is used to operate a pump. Maintain communication with the pumping and receiving stations.
How to delete or disable Active Fuel Management?
How to Delete or Disable Active Fuel Management (AFM) on GM Engines. 1 1. Install an AFM Delete Kit. An AFM Delete Kit is recommended when an AFM lifter fails or when doing performance upgrades. It replaces the AFM 2 2. Install an AFM Disabler. 3 1. Valley Cover. 4 2. Engine Block. 5 3. Lifters.
What should facility manager do during fuel loading?
Facility manager or designee should observe the delivery driver during loading/unloading. Periodically inspect all systems, hoses and connections. When loading, keep internal and external valves on the receiving tank open along with the pressure relief valves. When making a connection, shut off the vehicle engine.