Can you replace the oil pump on a Softail?
Don’t despair, replacing the oil pump on your Softail isn’t as daunting a task as it might appear. There are only a few steps needed to remove and replace the oil pump.
Where is the oil pump on a Harley Davidson Softail?
There are two hoses connected to the top of the oil pump face plate. These are attached with two hose clamps. A flat head screwdriver is needed to loosen the clamps and slide them up the hose.
What causes an oil leak in a Softail?
Most oil leaks from the oil pump are usually caused by a bad gasket rather than a failed oil pump. Once the front part of the pump is removed, the gasket can simply be replaced and that should solve the problem. Many folks opt to purchase a higher flowing oil pump when doing a replacement to help with extra cooling in hotter environments.
How do you change oil in a Harley Davidson Softail?
Get your pan into position under the drain plug. Remove the oil fill cap. Remove the drain plug and let the oil drain into the pan. Figure 1. Remove this drain bolt and let all the oil drain from the bike.
Don’t despair, replacing the oil pump on your Softail isn’t as daunting a task as it might appear. There are only a few steps needed to remove and replace the oil pump.
Most oil leaks from the oil pump are usually caused by a bad gasket rather than a failed oil pump. Once the front part of the pump is removed, the gasket can simply be replaced and that should solve the problem. Many folks opt to purchase a higher flowing oil pump when doing a replacement to help with extra cooling in hotter environments.
How much does a Harley Davidson Softail Deluxe cost?
2008 Harley-Davidson FLSTN Softail Deluxe. Picture credits – Harley-Davidson. Submit more pictures. More pictures… 73.9 out of 100. Show full rating and compare with other bikes US$ 17445. Prices depend on country, taxes, accessories, etc. Injection. Electronic Sequential Port Fuel Injection (ESPFI)
There are two hoses connected to the top of the oil pump face plate. These are attached with two hose clamps. A flat head screwdriver is needed to loosen the clamps and slide them up the hose.
How do you replace an oil pump on a Harley Davidson?
These steps do not include removing your pipes, but you may opt to do that to make access to the oil pump a lot easier. Before removing the oil pump, you must remove the oil first. Get your pan into position under the drain plug. Remove the oil fill cap. Remove the drain plug and let the oil drain into the pan.
Can a high flow oil pump be replaced?
If you have purchased a high-flow oil pump, follow the manufacturer’s installation procedures. They should be bolt in with the proper fitment, and an OEM replacement will go back on just as the old came off. You may not need to actually replace the oil pump, but give it a good cleaning.
Can a bad oil pump cause an oil leak?
Oil Pump is now completely removed. Most oil leaks from the oil pump are usually caused by a bad gasket rather than a failed oil pump. Once the front part of the pump is removed, the gasket can simply be replaced and that should solve the problem.