How do you use a piggyback drain plug?
Carefully, thread the piggyback plug into the hole, a few threads forward and then a few back. Think of it as a tap. It takes several minutes but you need to be sure the threads are clean and sharp.
Why did I remove the plug from my crank case?
The only concern in reinstalling the pipe plug is over-tightening it and cracking the case by mistake. If that had happened though, it is very likely that oil would be coming out of that area of the case pretty seriously.
Where is the drain plug on a Harley Davidson?
The plug you removed is the one when installing a oil pressure gauge. There are 3 bolts that are removes to drain the 3 oils. Did you use a Allen to remove? And left of drain plug? No correlation to exhaust leak. baharp likes this. Was the “plug” you removed at the bottom, center of the crankcase? And was it a pipe plug?
What kind of drain plugs do I need for my Pool?
Aquatix Pro Pool Winterizing Plug Premium 1.5″ to 2″ Swimming Pool Winter Expansion Plugs with SS Screw, Stainless Steel Bolts, Heavy Duty Rubber, Protect Your Equipment Today! . . . . Only 19 left in stock – order soon.
The only concern in reinstalling the pipe plug is over-tightening it and cracking the case by mistake. If that had happened though, it is very likely that oil would be coming out of that area of the case pretty seriously.
The plug you removed is the one when installing a oil pressure gauge. There are 3 bolts that are removes to drain the 3 oils. Did you use a Allen to remove? And left of drain plug? No correlation to exhaust leak. baharp likes this. Was the “plug” you removed at the bottom, center of the crankcase? And was it a pipe plug?
What’s the drain plug on a snowmobile?
Pull a plug on one side and machine dies. Compression 124 on both, switched plugs and wire no difference, switched carbs no difference. Good spark, good compression, getting fuel and air. What am I missing?.
Where are the drain plugs on a Polaris sled?
On most Polaris sleds, there is 2 bolts under the exhaust Y-pipe on the crankcase. Just unscrew both of them to drain if you have to. Both my Indy’s have the drain bolts. Yes there are 2 bolts should be a 10mm head. #5 on pic. Thanks, found them, drained and no difference.