How to replace the headlamp switch on a Porsche Boxster?
The part number for the replacement switch is 996-613-535-00 (thru 2004) or 997-613-535-01 (2005-) and it costs about $125 from the online catalog of PelicanParts.com. Begin by removing the two screws on the leftmost side of the dash with a Torx driver. In the lower right is shown a brand new headlamp switch assembly.
How do you change the brake light switch?
Rotate the switch in the clockwise direction to lock it in place. Note: While installing the switch you may have to press down on the brake pedal in order to insert it all the way. Step 3: Reconnect the battery. Now that the new switch is installed, reconnect the wiring harness and negative cable on the battery.
How can I tell if my brake lights are working?
Press down on the brake pedal and see if the lights illuminate. Note: On the newer style switch, you will not need to adjust anything and the lights should work after installation. If the lights do not work even after adjustment, a certified technician would be able to inspect the switch and diagnose the problem. Step 1: Save the nuts.
What happens when the brake light switch is not working?
Brake light switch is installed above the brake pedal. Many vehicle systems including Push-Button start, Antilock Brakes and Vehicle Stability Control cannot operate if a brake light switch is not working properly. The brake light switch serves two major functions. First, it turns on the brake lights when a driver presses the brake pedal.
Why is my headlight dim in my car?
If your car has a headlight that puts out about as much light as a flashlight with weak batteries, we’ve got two simple fixes for you. Most DIYers think they’ve got a bad headlight switch or a bad connection in the power feed. But most dim headlights are caused by a corroded ground wire.
How can I fix a dim headlight bulb?
So start diagnosing a dim headlight condition by checking the condition of the electrical connector at the bulb. If you find any sign of discoloration or melting, you must replace the connector. Some companies make ceramic headlight bulb connectors that eliminate the problem of melting caused by overheating. See these posts for more information.
Why is my headlight light not working properly?
That’s almost never the cause. The power connectors for headlights are usually well protected against the elements. The connectors often have a silicone seal to keep them dry and corrosion-free. But the ground connection is just the opposite. Carmakers use the body as the return path for the headlight circuit.