How do you reset a Ninebot scooter?

How do you reset a Ninebot scooter?

First method:

1. Turn the SEGWAY Ninebot KickScooter ES2 On by clicking Power Button.
2. Hold the throttle and the brake lever all the way down and keep them pressed.
3. Turn the KickScooter ES2 Off.
4. Release the acceleration and brake levers.
5. Turn the scooter on by pressing Power Key for 3 seconds.
6. Good job!

What to do if your scooter won’t turn over?

Check your owner’s manual to make sure that you are doing all you need to to complete the electrical circuit which enables it to start. If the scooter doesn’t turn over when you’ve done all the required operations, there’s an electrical problem with the battery. Make sure the battery is charged. If it is, make sure the fuse hasn’t blown.

Why does my electric scooter not start up?

This issue occurs in gas-powered scooters when you use an electric starter, and it won’t start. For the bike to start, all its components must work together in harmony. If the engine of the scooter is not starting, but it makes noises, the fuel is not compressing effectively.

What happens when the battery on an electric scooter is low?

You have to understand one thing first: when the scooter’s battery is low, it will switch on, but the motor will not run. On the other hand, when the battery is empty, it won’t even switch on, let alone the engine. So, if you’re not getting any power on the electric scooter, most likely the battery is empty.

Why is my free wheel not working on my scooter?

If your free-wheel lever is in the unlocked position you will not be able to use the motor to move your scooter or wheelchair. Here is an example of what a common freewheel looks like:

Check your owner’s manual to make sure that you are doing all you need to to complete the electrical circuit which enables it to start. If the scooter doesn’t turn over when you’ve done all the required operations, there’s an electrical problem with the battery. Make sure the battery is charged. If it is, make sure the fuse hasn’t blown.

Why does my scooter not go after charging?

Scooter worked but will not go after charging. Secure unit; turn power on & with NO weight on the scooter, lift back end up and apply the throttle. If rear wheel spins freely, replace battery and/or charger. If that does not work, continue on.

How to troubleshoot and repair a mobility scooter?

Make sure the charger is not connected (scooters & wheelchairs normally will not move if its charging). 2. Make sure the free wheel lever is in drive mode (if you can push the scooter or wheelchair and it easily moves then its in free wheel mode).

Why does my electric scooter stop running after 3 months?

Once the scooter reaches walking speed and the throttle is engaged the scooter should run until the throttle is released or the brake is used. Electric scooters that have not been charged for over 3 months will have partially discharged battery packs which may not provide enough power to run the scooter.