Why does my low beam headlights not work?

Both high beams & driver side low beam work. Fuses have been checked and are good. The bulb has been changed as well as the pigtail connector. Still no resolve. Checked the wiring to make sure we had a good connection. Anybody have any suggestions???

Why are both low beams working on my Jetta?

Hello, i am having the exact same problem with a 2012 jetta.. all the lights work except for the low beams, all fuses and bulbs have been replaced. I have no idea what it could be????

What happens if you don’t adjust your light switch?

If adjusting the switch doesn’t work, you may have a blown fuse or bad lightbulb. Or, the entire switch may be faulty, in which case, have it replaced by a certified mechanic.

Can a low beam light be put on?

High beam yes, spot lights yes, fog lights yes and parkers yes. What is wrong with low beam? I drove home (i live only 3 mins from work) with parkers and fog lights on. Couldnt see very far at all. Lucky i didnt get pulled over.

Why are my low beam lights not working?

A burned-out light bulb could also cause low-beam lights to malfunction. However, this usually means that the headlights will not work regardless of the dimmer switch setting.

Why are my tail lights not working but brake lights are working?

Burnt out light bulbs – The other reason your tail lights are not working but your headlights are maybe a blown bulb. When the filament inside the bulb breaks it cannot illuminate the gas enclosed within the glass cover. This burnt-out bulb does not affect the circuitry of the light system and it continues to function normally.

Hello, i am having the exact same problem with a 2012 jetta.. all the lights work except for the low beams, all fuses and bulbs have been replaced. I have no idea what it could be????

Is it possible to fix a bad low beam headlight?

Fortunately, fixing a bad low beam is a straight forward process in the majority of vehicles that can be done by most people without just a few hand tools. If replacing your headlight bulb does not work, there may be an electrical issue in your vehicle that should be addressed by a professional. Identify a blown out bulb.

Can a high beam light bulb be blown out on the same side?

If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.

Can a blown headlight affect the other side of the car?

No. Your headlights should be powered independently from one another and blowing out one should not have any affect on the headlight on the other side of your car. If both of your headlights are out, they may have both blown out, or there may be an electrical issue with the vehicle. A blown headlight fuse is also a likely culprit.

Why is my low beam light not working?

My low beam went out and I thought it was the bulb. I replaced both bulbs and turned the lights on and I still am unable to get the light to work. I tested the light socket and there is power to it when I turn the lights on. When I re-plugged the bulb back in it, it does not work.

How to check if low beam headlights are working?

Lets start by checking for voltage to the bulb. Use a meter to check for 12V to both headlights and ground, with headlight switch on low beam. Let me know your results. I pulled the driver’s side headlight (easiest to get to….), removed the bulb from the holder and checked the socket with my meter. There was no voltage…

What is the fuse for a low beam light?

The number seventeen fuse has has power to both sides of the fuse with the low beams on. The black ground wire for the lamp has 0.1 ohms. With the low beams on and the light bulb out of the connector, the yellow wire reads 11.8.

Do you need to replace both high and low beams?

Some vehicles use a single bulb for both high and low beams while others do not. If the high beam on the same side is also out, it may be one bulb. You do not need to purchase specific bulbs for each side, but identifying which is the blown out bulb will help you to replace it without having to start the vehicle again.

Why is the low beam light out on my Dodge Ram?

I swapped the known good bulb from the other side and the low beam was still out, even though the high beam and fog lights were all functional. I started researching other causes for the issue and discovered that 2006 and later model year Dodge trucks have no fuses nor relays controlling power to the lights.

Why are the low beams on my Chevy Silverado not working?

LO HDLP – LT & LO HDLP – RT , These are B+ voltage for low beams . Your headlamp low beam relay could be bad or if the BCM isn’t energizing it could be a switch problem .

Why is my headlight not working on my Dodge Ram?

First, let me explain what I’m talking about and allow me to vent for just a moment… After replacing the driver’s side headlight bulb twice on our 2006 Dodge Ram 2500 SLT 4WD Cummins Diesel pickup, the low beam still wasn’t working.

What to do if your headlight is not working?

It should be, but they should also be listed under the lid. You can also check if it’s the DRL module. When you notice one side not working (Low or High beam) it could be the module. Do a search for that and see if those symptoms match yours… fix is to resolder bad soldering connections in the module…

Why is my passenger side headlight not working?

Passenger side headlight not working. Not open for further replies. Over the winter, the passenger side headlight just stopped working. Naturally, I changed the bulb and nothing. The it dawned on me that neither high nor low beam were working, so I thought it may possible be a ground issue.

Why are my headlights not working in high beam?

If just one bulb fails to work in either high beam mode or low beam mode, it may be the bulb. Most headlight failures that are limited to just high or low beams are related to a relay or the high beam control switch.

What happens if you change both headlights at the same time?

If you aren’t absolutely confident in your ability to swap the bulbs without contaminating the glass envelope, don’t do it. You may destroy, or drastically shorten the life of, your good bulb. When both headlights stop working at the same time, the bulbs usually aren’t at fault.

Why are the low beams not working on my 96 Vito?

I had a similar problem on my 96 Vito with low beams on both sides not working when the lights where in the on position.

Are there any low beams on my 2002 ML320?

My recently purchased 2002 ML320. One of the PPI (Pre-Purchase Inspection) comments was that the low beams are not working. I thought it would be the bulbs…..nope!

What causes a low beam light to stop working?

If a headlight fuse blows, it could cause the headlights to stop working. Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights.

Can a high beam go out at the same time?

High beams are still fine. I’ve never seen two headlights go out at the same time. Before I go and replace them, what are the chances that there is something (relay, etc) broken in the electrical system?

Why are my high beam headlights not working?

In the case of high-intensity discharge (HID) headlights, or Xenon headlights, there’s an additional component. To get the xenon and salts to plasma state, the HID generator bumps the voltage up to 30,000 V, then stabilizes around 90 V when the bulb is in operation. If the generator fails, the bulb won’t light.

My recently purchased 2002 ML320. One of the PPI (Pre-Purchase Inspection) comments was that the low beams are not working. I thought it would be the bulbs…..nope!

What should I do if my Head Light is not working?

Inspect your head light, head light plug, and harness. Make sure your connections can be secure and are without corrosion. While your nacelle is open, try to get a look at your passing lamp switch and it’s harness. If you do not see anything obvious, plug your headlight in while it hangs loose.

What to do if you drop a low beam light bulb?

The oil on your hands can compromise the glass of the bulb, reducing its lifespan. Protect your bulb from this by wearing gloves or using a tissue any time you come into contact with the glass of the new low beam headlight bulb. Be careful not to drop the bulb as you remove it from the package.

What’s the problem with my Harley Davidson headlight?

I have a 2011 Road King Classic. Recently I began to notice at night a Harley-Davidson headlight problem and passing lamps would blink off and back on occasionally. The Harley Davidson headlight problems worsened and looking at the service manual, I decided the headlight relay must be bad.

What happens if a headlight comes loose while driving?

If the wires come loose while you are driving, the headlight will stop working. The headlight bulb and assembly should now be connected to the car once again. Be careful not to yank on the assembly with it connected, as you may rip a wire out of the harness.

Why are my low beam headlights not working?

If a headlight fuse blows, it could cause the headlights to stop working. Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams.

Why does MY BMW headlight fog up when high beam is on?

Headlight fogging is caused when polycarbonate is exposed to ultraviolet light and exhaust emissions, as a chemical reaction occurs which causes the headlights to fog up. With headlight fogging, the light released from the headlight is hard to see even when both the high and low beams are switched on. How can these problems be resolved?

Why do BMWs have low and high beams?

BMW Headlight Low and High beam Malfunction Explained!! – Xenons4U Automotive Blogs For BMW drivers, the car’s low and high beams are not just a useful feature, they are a legal necessity to make driving in the dark and in severe weather safe.

What to do if your low beams don’t work?

Either way, if your low beams aren’t working but your high beams are, the first things we check are the bulbs. If you’re thinking of replacing the headlight bulbs yourself, make sure you’re familiar with the correct installation procedure for the type of bulb you’re replacing.

How does a headlight switch turn on a high beam?

In the same way that your headlight switch activates a relay to provide power to the headlights, operating your high beam control will generally activate a relay to turn on the high beams. In the case of dual filament headlight capsules, this literally sends power to the high beam filament.

What to do if your headlight bulb is not working?

Before you write off your headlight bulb as bad, it’s important to look at the electrical connector for any signs of damage or corrosion. If the connector has come loose, pushing it back on may fix the problem. However, you’ll still want to dig a little deeper to figure out why it came loose in the first place.

Why do high beam headlights work but low beams don’t?

Most headlight systems are also designed with a relay that switches the power between low beam and high beam headlights. If this relay goes bad, it could allow power to the high beams, but not the low beams. 1. Headlight Bulbs This is the most common reason we see for why a car’s high beam headlights work but the low beams don’t.

Why do the headlights work when the lights are off?

When the lights where off and the engine was running the low beams worked because of the secondary relay that powers the lows beam automatically when engine is running (this was a requirement in my country, low beams turning on automatically when engine starts).

What to do if your headlight fuse is not working?

First, locate the headlight fuse and make sure it is intact. If it is, use a voltmeter to see how much power, if any, is reaching the headlights. If there is no power reaching them, there is a break in the wiring somewhere between the fuse panel and the headlights themselves. Thanks!

How many fuses are in front low beam light?

There are 2 10 Amp fuses, one for each front low beam light (#14 and 15 in the fuse box), so won´t expect for both to blow at the same time. There is however also a single lowbeam relay, which gets its signal from the body control module.

What to do if your left headlight is not working?

If only your left headlight is not working then try to turn on the high beam and see if both headlights work on high beam. If both work then check fuse #26 and left low beam relay in the engine compartment fuse box. Either the fuse is blown from the last bulb or the relay is burned out from the last bulb.

Navigation

Why does my low beam headlights not work?