How to replace combination switch on a Hyundai?
To remove the cable from the battery post, you will need to loosen the 10 mm bolt. Wait at least 10 minutes before you start work on the airbag system. This opens in a new window. Remove the airbag using a screwdriver to press on the three locking pins that hold the airbag in place. Watch this video clip for more help. This opens in a new window.
What does the Multi Function Switch on a car do?
The multi-function switch on your Vehicles controls the hazard flashers, turn signals and headlights. When two or more of these systems experience malfunctions simultaneously, it’s a good bet your multi-function switch has failed.
How do you replace a Lumina light switch?
Take out the old switch and set the new one in place. Return the switch’s retaining screw and then plug the wiring harness back into the rear of your Lumina’s new multifunction switch. Use the trim tool to replace the trim along your steering wheel column. Replace your Lumina’s negative battery cable.
How much does it cost to replace a switch on a Hyundai Elantra?
On average, expect to pay between $400 -$1200. Replacing Hyundai Elantra Headlight / Turn Signal Switch yourself will cost you less than $200 in parts if purchased online. You will need the right tools and two hours to change the headlight/turn signal/ wiper switch.
When did the Hyundai Tucson fuse box come out?
In this article, we consider the first-generation Hyundai Tucson (JM), produced from 2004 to 2009. Here you will find fuse box diagrams of Hyundai Tucson 2004, 2005, 2006, 2007, 2008 and 2009, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.
How do you replace a headlight switch on a Hyundai?
Once you remove the steering wheel, you will be able to access the clock spring. Before you can remove the clock spring, you will need to remove the plastic trim held in place with three screws. This opens in a new window. Remove two Phillips screws that hold the headlight switch in place.
Where is the clutch cycling switch on an AC AC?
The clutch cycling switch measures A/C pressure near the evaporator outlet, and is often mounted on the accumulator. If the incorrect pressure is sensed, the switch will open the A/C compressor clutch circuit to prevent operation.