Which bearings are used in wheel hubs?
Tapered bearings
Tapered bearings are most often used in wheel bearing assemblies mounted inside of wheel hubs. Some automakers use one bearing assembly with tapered roller bearings while others pair these assemblies up next to each other, facing in opposite directions. Tapered Roller Bearings.
How long do ATV ball joints last?
Premium Member. Ball Joints typically last around 2-600 miles on rocky, bumpy, and rutted terrain. When you securely jack up the RZR place your hands at 12 & 6 O’clock position and lightly tug if you feel something moving you need order replacement parts.
Can a Suzuki Eiger be used to replace wheel hub bearings?
We have laid out a basic process for bearing access and replacement using a Suzuki Eiger 4×4. Most utility ATVs and also the vast majority of UTVs 2010 and older will use the same basic process, but a good OEM service manual is always nice to have for reference when working on your particular model.
How is the wheel bearing knuckle attached to the suspension?
Your next focus will be on removing the wheel bearing knuckle from the suspension arms. This Suzuki has a pinch bolt type connection holding the upper and lower ball joints to the bearing knuckle.
Why are my wheel bearings failing on my ATV?
These can sometimes fail or be prematurely damaged, allowing mud and water to build up on the bearing itself. If you ride in a lot of water or mud and do not clean your machine on a regular basis, then chances are that your wheel bearings will fail faster.
What kind of wheel nut do I need for an ATV?
The axle nut varies from one ATV to the next. The castle nut is common, but a stake nut may be found on others. After removing the axle nut you will need to focus on the brake caliper. The caliper will have 12-14mm bolts or an Allen-head type bolt. Our Suzuki Eiger had the Allen-head bolt.
We have laid out a basic process for bearing access and replacement using a Suzuki Eiger 4×4. Most utility ATVs and also the vast majority of UTVs 2010 and older will use the same basic process, but a good OEM service manual is always nice to have for reference when working on your particular model.
Your next focus will be on removing the wheel bearing knuckle from the suspension arms. This Suzuki has a pinch bolt type connection holding the upper and lower ball joints to the bearing knuckle.
What are the parts of a Suzuki ATV?
Engine Parts – Cylinder, Pistons, Crank and Rods, Cylinder Head, Valves Speedometer, Tachometer, Complete Instrument Cluster Front Fender, rear fender, footwells, Side Covers, Complete Front Clips Front Wheel, Rear Wheel and Swing Arm, front bumpers and guards A-arms, hubs, Axle, Brake Master Cylinder, Brake Caliper 1996 suzuki 350 carb.
What kind of ATV is the Suzuki Ozark?
2002 SUZUKI OZARK 250 REAR DEFF AND AXLE ASS. 2003 SUZUKI OZARK 250 REAR DEFF. 2001 Suzuki QUAD RUNNER 4X4 500 FRONT DEFF.