What is the torque setting for the rear wheel nut?
There is no real torque settings for the rear wheels, except to say, do not over tighten or you will stretch the lugs and the will loosen over time. 1999 ford focus rear wheel bearing torque setting replaced wheel bearing do not know the torque setting, could you please help.
What is the torque setting for the bearing nut on a DS3?
Torque the nut to 76 ft. lbs. (103 Nm). Align the steering knuckle cam and torque the bolt to 85 ft. lbs. (115 Nm). Brake line to the wheel cylinder.
What is the torque setting for the bearing nut on a 3008?
Peugeot 3008 2012 1.6 H D I. Can someone please confirm torque setting for 36mm nut, when replacing rear discs that have wheel bearing attached? Tighten drive plate to 60 Nm. Clutch pressure plate : 15 Nm Crankshaft pulley/damper centre bolt : Use new bolts. Tighten centre bolt to 130 Nm + 40°-50° 20 Nm + 80°-90°.
How to measure the torque of a tone wheel?
Use an appropriate tool to press tone wheel. Install hub/bearing assembly with rounded portion of outer race facing up. Install 4 hub/bearing assembly bolts and rotate hub to seat bearing. Measure wheel bearing starting torque with a spring balance or equivalent device.
There is no real torque settings for the rear wheels, except to say, do not over tighten or you will stretch the lugs and the will loosen over time. 1999 ford focus rear wheel bearing torque setting replaced wheel bearing do not know the torque setting, could you please help.
Torque the nut to 76 ft. lbs. (103 Nm). Align the steering knuckle cam and torque the bolt to 85 ft. lbs. (115 Nm). Brake line to the wheel cylinder.
Peugeot 3008 2012 1.6 H D I. Can someone please confirm torque setting for 36mm nut, when replacing rear discs that have wheel bearing attached? Tighten drive plate to 60 Nm. Clutch pressure plate : 15 Nm Crankshaft pulley/damper centre bolt : Use new bolts. Tighten centre bolt to 130 Nm + 40°-50° 20 Nm + 80°-90°.
Use an appropriate tool to press tone wheel. Install hub/bearing assembly with rounded portion of outer race facing up. Install 4 hub/bearing assembly bolts and rotate hub to seat bearing. Measure wheel bearing starting torque with a spring balance or equivalent device.