How does Harley Softail suspension work?
For its suspension system, the Softail utilizes a cage that looks like an old rigid frame to replace the swingarm. Instead of visible outboard shocks, Softails use a pair of shocks that operate in extension-the shocks get longer as the suspension compresses-to support and dampen the movement of the rear suspension.
What do I need to adjust the shocks on a Harley Davidson?
Always adjust shocks with the motorcycle resting on the jiffy stand and always adjust both shocks the same number of turns; equally. You will need a spanner wrench (Harley Davidson part # 94448-82B) and a large 1-1/16″ wrench.
How does the fxcw rocker work on a Harley Davidson?
The new FXCW Rocker and FXCWC Rocker C feature the Rockertail rear end that mounts a form-fitting fender directly to the swingarm over a 240 mm tire. The result is a reproduction of the authentic lines of a slammed hard-tail custom with the comfortable ride of a modern suspension as the rear wheel and fender move together.
Where are the shock absorbers on a Harley Davidson Softail?
Softail models feature adjustable rear shock absorbers located beneath the motorcycle. They function opposite of a conventional shock, as they are inverted. Positioned horizontally under the motorcycle, the shock is mounted to the frame in the front of the bike and to the swing arm in the rear. As the shock compresses, the bike gets taller.
When did the Harley Davidson Softail rocker C come out?
MILWAUKEE (July 9, 2007) – The Harley-Davidson Softail family grows in a new direction for 2008 with the introduction of the FXCW Rocker and FXCWC Rocker C.
How to adjust the rear shock on a Harley Davidson Softail?
Lower the motorcycle to the ground and remove the hydraulic jack stand from underneath the motorcycle. The shock absorber adjustment spanner wrench is available from your Harley Davidson dealer. Be careful when placing the hydraulic jack underneath the motorcycle. Do not place the jack underneath the brake pedal.
How do you adjust shocks on a motorcycle?
Make sure you turn the shock adjuster plates an equal number of turns for each shock. Tighten the jam nut on each shock absorber in a clockwise direction. Lower the motorcycle to the ground and remove the hydraulic jack stand from underneath the motorcycle.
Where do you put the shock absorber on a Harley Davidson?
Lower the motorcycle to the ground and remove the hydraulic jack stand from underneath the motorcycle. The shock absorber adjustment spanner wrench is available from your Harley Davidson dealer. Be careful when placing the hydraulic jack underneath the motorcycle.
The new FXCW Rocker and FXCWC Rocker C feature the Rockertail rear end that mounts a form-fitting fender directly to the swingarm over a 240 mm tire. The result is a reproduction of the authentic lines of a slammed hard-tail custom with the comfortable ride of a modern suspension as the rear wheel and fender move together.