What should I do if scooty is not starting?
Just unplug and re-plug the connectors and try to start the motorcycle again. 1) Engine Cutoff Switch: It is one of the most common things we forgot to check before getting annoyed with the starting problem. Most of the time we use the ignition key to turn off the motorcycle instead of the engine kill or cutoff switch.
What does it mean when your scooter won’t start?
It screws in instead of the spark plug and measures cylinder pressure. When you crank the engine you should see a reading of around 150 psi or more. If it’s 100 psi or less there’s likely and engine problem (bad valve, bad piston, failed piston rings) which will need the engine taken apart to find.
What to do if choke on scooter wont start?
If the automatic choke is OK, the starter cranks the engine, there’s gas and there’s a spark then there may be an engine problem. You need to check the cylinder compression. You need a compression tester to do this. It screws in instead of the spark plug and measures cylinder pressure.
Why does my scooter stall out when idling?
And the obvious question, is your scooter stalling out when idling? If the answer to any of these questions is yes, they are all symptoms of your engine valves being too tight. Engine valves tighten over time after extensive use.
What to do if your scooter speed controller is not working?
If the speed controller has no burned or melted wires and it does not smell burnt then it still could be defective. Test all of the other components of the electrical system around the speed controller and use the process of elimination to detect if the speed controller is working or not.
It screws in instead of the spark plug and measures cylinder pressure. When you crank the engine you should see a reading of around 150 psi or more. If it’s 100 psi or less there’s likely and engine problem (bad valve, bad piston, failed piston rings) which will need the engine taken apart to find.
And the obvious question, is your scooter stalling out when idling? If the answer to any of these questions is yes, they are all symptoms of your engine valves being too tight. Engine valves tighten over time after extensive use.
If the automatic choke is OK, the starter cranks the engine, there’s gas and there’s a spark then there may be an engine problem. You need to check the cylinder compression. You need a compression tester to do this. It screws in instead of the spark plug and measures cylinder pressure.
How can I check if my scooter has a spark?
To check for a spark, remove the spark plug from the cylinder, hold the tip of the plug against the cylinder head and crank the engine. You should see a spark across the gap.