What kind of oil does a 2006 Street Bob take?
Your bike came from the factory with H-D Syn3 20W50 synthetic oil in the engine, primary case, and the transmission. You can use lubricants made by Mobil, Amsoil, Royal Purple, Golden Spectro, Red Line, and RevTech.
How do you change the primary cover on a Harley Davidson?
Set the primary cover aside. Slide your drain pan in place, then use the 5/ 8-inch socket and socket wrench to loosen the drain plug. Remove it the rest of the way by hand so it doesn’t fall into the drain pan. Next, replace the gasket on the primary case cover. You should be able to pull the old one right out.
What’s the outer cover on a Harley Davidson?
Video-In this free DIY video we show you how to remove and install the outer primary cover on a Harley Davidson motorcycle. We did this because we were changing the chrome outer primary cover to a black colored one.
How do you change primary oil on a Harley Davidson?
Be sure to check your owner’s manual or the AMSOIL Product Guide for the correct primary oil capacity for your bike. Once you’ve filled the primary case with fluid, double check the fluid level visually. The primary fluid should touch the bottom of the clutch plate. Finally, replace the primary cover.
How do you change the drain on a Harley Davidson?
Slip a new O-ring onto the bolt, then coat the O-ring with Harley-Davidson Formula+ Primary Chaincase Fluid. Screw the drain bolt into the primary chaincase by hand. Tighten the drain bolt to 17 foot-pounds, using a torque wrench and a 3/8-inch Allen socket.
Use a T27 bit to remove the five Torx bolts from the derby cover. Pull off the derby cover. Figure 3. Inspection cover and derby cover. Figure 4. Remove the five T27 Torx bolts to pull off the derby cover. When the primary has finished draining, you’ll want to inspect the plug for any debris.
Can you fit a drag specialties cover on a Harley Davidson?
If your bike came from the factory with floorboards fitted as standard, then you should have no problems with fitting this Drag Specialties Harley Davidson outer primary cover. They’re all designed to be of the same shape as the original bike for which you select from our drop down fit menu.
How do you change the clutch on a Harley Davidson?
Use a torque wrench to tighten them to 10-12 foot pounds. Once the cover is back on, get the bike down and take it for a test ride. It is not common, but some oils can cause the clutch to slip, and would need to be changed again immediately.
Where can I find parts for a 1978 Harley Davidson?
We have updated our Privacy Policy. Please click here to review the updates. Accept Type Street Dirt Year Make Model Go! No saved bikes? Use the Shop By Bike tool to search for parts that fit your motorcycle.