How much is a 94 Sportster worth?
Values
| Excellent | $5,620 |
| Very Good | $3,520 |
| Good | $1,555 |
| Fair | $720 |
| Poor | N/A |
How do you change the primary chain on a Sportster?
Remove the two screws that hold the primary chain inspection cover on. Using a funnel, pour 32 ounces (one bottle) of Harley Davidson Transmission and Primary Chaincase Lubricant into the primary chain inspection hole. According to the Sportster maintenance book, the fluid level should not go above the bottom of the clutch diaphragm spring.
How do you change the clutch on a Sportster?
Remove the six torx head screws that hold the clutch inspection cover on, and replace the inspection cover gasket. Remove the two screws that hold the primary chain inspection cover on. Using a funnel, pour 32 ounces (one bottle) of Harley Davidson Transmission and Primary Chaincase Lubricant into the primary chain inspection hole.
How do you change transmission oil on a Sportster?
Ride the bike to heat up the transmission oil prior to draining. This will help the oil to drain completely. Remove the Sportster transmission oil drain plug using a 5/8 wrench and let the oil drain from the transmission. It is recommended that the motorcycle be straight and level and not leaning on the jiffy stand to ensure complete draining.
What kind of chain cover do you need for a Sportster?
Using a crisscross pattern, tighten screws to 84-108 in-lbs. (hand tighten, but don’t over tighten) Replace the primary chain inspection cover, applying a modest amount of Loctite to the screws. Road test the Sportster to ensure the transmission shifts normally.
How to replace the shifter on a Harley Davidson Sportster?
Remove the shifter and linkage by removing the pinch bolt and prying it off. Drain the primary oil and remove the primary cover. Some cover screws are longer than others, so keep track. If you forget, the manual shows which go where.
How to remove clutch cover from Sportster Evolution?
Insert a heavy duty spudger or similar prying tool into the gap between the clutch inspection cover and the transmission housing near where clutch cable enters the housing. Gently pry the clutch inspection cover away from the transmission housing. The clutch cover spring may fall out.
How to adjust primary chain on Harley Davidson Sportster?
Checking and adjusting a Harley Davidson Sportster primary chain,It is a 20 minute job.That can be carried out by using allen keys, 27 torx bit and 7/8 wrench. Any body can do this job. Loading…
How to replace the regulator on a Harley Davidson Sportster?
Install new regulator, using dielectric grease on the surfaces where the regulator bolts to the frame. Tighten screws securely, using star washers on both sides. Figure 1. Regulator location in front of motor.