How to tighten torque clutch on Suzuki GSX are 1000?
Tightening torque clutch sleeve hub nut (a): 95 n·m (9.5 Kgf-m, 68.7 Lbf-ft) Lock the clutch sleeve hub nut with a center punch. Install the clutch push rod (12) into the countershaft.
Where is the spring washer on a Suzuki GSX are 1000?
Install the clutch push piece (13), bearing (14) and thrust washer (15) to the countershaft. thrust washer (15) is located between the pressure plate and bearing (14). Install the spring washer seat (16) and spring washer (17) onto the clutch sleeve hub correctly. Apply engine oil to the clutch drive plates.
How to adjust the play of the clutch?
Adjust clutch cable play according to the following procedure: Turn the clutch cable adjuster 1 to provide the specified play. Turn in the adjuster 1 all the way. Remove the cap from the right side engine cover. Hold the clutch push piece 2 and loosen the lock nut 3. Hold the clutch push piece 2 And turn in the adjuster 4 until it stops.
How do you adjust the clutch on a Honda Accord?
Hold the clutch push piece 2 and loosen the lock nut 3. Hold the clutch push piece 2 And turn in the adjuster 4 until it stops. Hold the clutch push piece 2 And turn out the adjuster 1/2 turns. Hold the clutch push piece 2 And tighten the lock nut 3. Adjust the clutch cable play with the adjuster 1.
Where to install clutch on Suzuki GSX are 1000?
Install the clutch push rod (12) into the countershaft. Install the clutch push piece (13), bearing (14) and thrust washer (15) to the countershaft. thrust washer (15) is located between the pressure plate and bearing (14). Install the spring washer seat (16) and spring washer (17) onto the clutch sleeve hub correctly.
How do you remove the clutch sleeve hub?
Unlock the clutch sleeve hub nut. Hold the clutch sleeve hub with the special tool. Remove the clutch sleeve hub nut. Remove the spring washer (13), washer (14) and clutch sleeve hub (15). Remove the seat washer (16) from the clutch sleeve hub. Remove the wave spring washers (17) and clutch lifter driven cam (18).
Adjust clutch cable play according to the following procedure: Turn the clutch cable adjuster 1 to provide the specified play. Turn in the adjuster 1 all the way. Remove the cap from the right side engine cover. Hold the clutch push piece 2 and loosen the lock nut 3. Hold the clutch push piece 2 And turn in the adjuster 4 until it stops.
Hold the clutch push piece 2 and loosen the lock nut 3. Hold the clutch push piece 2 And turn in the adjuster 4 until it stops. Hold the clutch push piece 2 And turn out the adjuster 1/2 turns. Hold the clutch push piece 2 And tighten the lock nut 3. Adjust the clutch cable play with the adjuster 1.