What does the Code 02 mean on a Harley Davidson?
If it were a current code, the light would remain lit while running. Above codes can also be set if 02 sensor fails. CKP – Crank Position Sensor. The CKP generates an “AC signal” which is sent to the ECM where it is used to reference engine position (TDC) and speed.
Where are the diagnostic codes stored on a Harley Davidson?
Enter diagnostic area by turning the ignition from OFF to ON while holding the reset switch in. The normal power-up sequence will occur before entering the diagnostic mode. Diagnostic codes set during this power-up sequence will be stored as well.
What does DTC stand for on a Harley Davidson?
DTC – Diagnostic Trouble Codes. ECM – Electronic Control Module. (The Computer) Computes the spark advance for proper ignition timing and fuel control based on sensor inputs (from CKP, MAP & TP sensors) and controls the low-voltage circuits for the ignition coils and injectors.
How do you clear a DTC on a Harley Davidson?
Record the codes. If DTCs are not to be cleared, Press and release the odometer reset button. Part number of module will be displayed. NOTE: To determine if a code is current or historic, clear the displayed code by pushing in and holding the odometer reset button ( longer than 5 seconds) until ‘clear’ comes up. Release the odometer reset button.
How to get a diagnostic code for a Harley Davidson?
The following procedure will instruct in retrieving and clearing ECM Diagnostic Trouble Codes and TSM/TSSM codes through the Harley guage cluster as well as a list of codes. 1- Turn Ignition switchto OFF & Run/Stop switch is to Run.
If it were a current code, the light would remain lit while running. Above codes can also be set if 02 sensor fails. CKP – Crank Position Sensor. The CKP generates an “AC signal” which is sent to the ECM where it is used to reference engine position (TDC) and speed.
How to get the ECM code on a Harley Davidson?
The following procedure will instruct in retrieving and clearing ECM Diagnostic Trouble Codes and TSM/TSSM codes through the Harley guage cluster as well as a list of codes. 1- Turn Ignition switchto OFF & Run/Stop switch is to Run. 2- Push odometer resetbutton in & hold. 3- Turnignition switchto Ignition and release the odometer reset button.
How to get a DTC on a Harley Davidson?
6 – To get the DTC within an area of diagnostics, push and hold the odometer reset button in for 5 seconds and release. If there are any DTC’s the code will be displayed or the word “none” will appear if there are no DTC’s. Push the odometer reset button again to view additional codes if they exist. 7 – Record the codes.
How do you close the Diagnostic Code on a Harley Davidson?
This is a modal window. This modal can be closed by pressing the Escape key or activating the close button. This is a modal window. This modal can be closed by pressing the Escape key or activating the close button. The Twin Cam allows us to see the Harley error codes also known as the diagnostic trouble codes.
What does the letter 5 mean on a Harley Davidson?
5 – Each letter represents an area of the diagnostics module. The module that is flashing is the one you are going to check. To move from one letter (module) to the next, you push the odometer reset button one time. (from P to S to SP to t and back to P, etc.)
What do the Harley Davidson HD model codes mean?
What are Harley Davidson model abbreviations? What do the HD model codes mean? Touring Model Letters Model Name FLHR Road King FLHRCI Road King Classic FLHRSI Road King Custom FLHS Electra Glide Sport
What is the diagnostic code for a 2007 Harley Davidson?
2007 Harley Davidson Diagnostic Trouble Codes (from Service Manual 99497-07) Getting Codes: 1- Turn Ignition switch to OFF & Run/Stop switch is to Run. 2- Push odometer reset button in & hold. 3- Turn ignition switch to Ignition and release odometer reset button.
What does the extra letter mean on a Harley Davidson?
Any extra letter means a feature associated with that particular bike grouping or ‘house’. Confusion is rife here as Harley may use the same letter to allotted to different features of a bike. The touring models are the biggest model bike Harley produces.
Which is the biggest model of Harley Davidson?
The touring models are the biggest model bike Harley produces. Touring Models are exactly designed with the grand tour in mind, with saddlebags and extra storage as well as extra room for pillions too. Harley’s Softail give the hard-tail appearance but with the hidden rear suspension system.