How do I set up Windows Hello on my computer?
Most PC’s with fingerprint readers already work with Windows Hello, making it easier and safer to sign into your PC. Here’s how to set it up: Go to the Start menu and select Settings . Go to Accounts > Sign-in options . Under Manage how you sign in to your device, select a Windows Hello item to add, change, or remove it.
How do you set ignition timing with no timing marks?
Rotate the engine very slowly back and forth until the screwdriver is at the maximum height. This indicates the number one cylinder is at Top Dead Center or “TDC” on the compression stroke. Locate the number one spark plug wire on distributor cap and make a tic-mark of this position with a marker pen on the distributor housing.
What’s the best way to adjust the timing of a rotor?
To adjust your timing, all you need to do is turn the distributor housing one direction or the other, depending on whether or not you want to advance or move back the timing. If the rotor turns clockwise, you’ll advance the timing by rotating the distributor counterclockwise, and vice versa.
How to set up Windows Hello with a fingerprint?
Select Windows Hello PIN to set up sign-in with a PIN. 1 Select Windows Hello Face to set up facial recognition sign-in with your PC’s infrared camera or an external infrared camera. 2 Select Windows Hello Fingerprint to set up sign-in with a fingerprint reader. 3 Select Windows Hello PIN to set up sign-in with a PIN.
Which is the best way to set engine timing?
Timing dynamically is fairly simple and is the best way to time your engine. Static timing is good for a baseline adjustment, but real accuracy requires a timing light. You can get a timing light for about $30 at Wal-Mart, so it’s not a big expenditure and is a wise investment. To set timing you will also need a tach/dwell meter.
Most PC’s with fingerprint readers already work with Windows Hello, making it easier and safer to sign into your PC. Here’s how to set it up: Go to the Start menu and select Settings . Go to Accounts > Sign-in options . Under Manage how you sign in to your device, select a Windows Hello item to add, change, or remove it.
Do you set the timing before setting the point gap?
NEVER set the timing before setting the point gap. Changing the point gap changes the timing. Once that’s done, you can proceed to set your idle speed. Do not adjust the timing until you’ve adjusted the idle speed to specifications (usually between 800 and 1000 rpm on the VW engine). Idle speed adjustment can only be done on a warm engine.
Select Windows Hello PIN to set up sign-in with a PIN. 1 Select Windows Hello Face to set up facial recognition sign-in with your PC’s infrared camera or an external infrared camera. 2 Select Windows Hello Fingerprint to set up sign-in with a fingerprint reader. 3 Select Windows Hello PIN to set up sign-in with a PIN.