Is there ABS reset button on BMW 1150g?
“Note: the K1200, R1200C and R1100S use the same ABS2 units as the 1150GS, but there is no ABS switch to use for the reset procedure. If you can access pin #21 on the ABS unit, you can ground it to achieve the same effect as having the ABS button.
What is fault code for BMW MOA R1150RT?
It does summarize the ABS fault codes for your bike (if ’04 is similar to ’02 R1150RT), but your manual gives the same info. Here is one relevant line from the article: “Gen AND ABS flashing alternately at 1Hz = Fluid level in Intergral ABS too low.Low-voltage”.
Is there a problem with the R1150R ABS?
Discussion in ‘ Road Warriors ‘ started by Lewis, Jul 6, 2010 . i dunno if I’m posting to the right forum, if no, maybe a mod should move my message to the appropriate forum.. i own a ’04 R1150R but i have a problem with integral ABS.
Are there any problems with the BMW 1150rt?
*fuel system inside the fuel tank– high pressure hoses failing are the biggest problem here. (not that expensive to repair but can cause a sudden & total engine quit while riding) I guess the bottom-line is: the BMW 1150RT can be (& usually IS) a great riding bike (absolutely a great touring bike at speed & long miles).
Can a 1150rt bike have an ABS failure?
Not that the ABS system can’t fail on the later 1150 bikes as there were/are some ABS system failures throughout the entire 1150RT year range. As to OVERRIDING the brake system if an ABS system failure occurs. They will stop with a failed ABS controller just not great & not like a conventional braking system.
Are there any known issues with the R1150RT?
*Obviously ABS system issues (again there were some) *Swing arm bearing play or wear (most have some issue with this as the miles accumulate) *Clutch slave cylinder leakage (not a biggie but can kill a clutch)
What should I do if my ABS controller fails?
As to OVERRIDING the brake system if an ABS system failure occurs. They will stop with a failed ABS controller just not great & not like a conventional braking system. There is no quick by-pass or workaround as the brake pedal & front brake lever are not directly connected to the calipers.
How to repair an ABS system on a BMW?
If you want to keep the ABS system then I suggest that you call Module Master “Phone 208- 892-0764” (they are very helpful) then give them your failure codes & ask if they can repair it for you. Also ask the price to repair. You will have to remove the ABS controller & send it in for repair (or have a shop do it for you).