How do I reset the alarm on my Harley Davidson?
Press right turn signal button 1 time. Security light stops flashing and security system is disarmed. If you’ve changed the number, use your new number instead of 31313. Here’s a copy of the wallet alarm card if you have lost yours. To view how to deactivate the security system using the manual PIN codes, read here.
What happens if you dont Set Your Harley alarm override pin?
With the newer HD Security Systems using proximity FOBs where the key FOB needs to be close to the bike for it to start, this is now more important then ever. If the battery in your FOB dies or it is damaged and you have not set your Harley Alarm Override PIN Code, you will not be starting your bike.
What’s the code for disarm on a Harley Davidson?
Button fob twice instead of right signal. Let’s assume for simplicity that your code is set at 31313 and you wish to use the manual disarm of the security system using the directional switches as if you lost your fob and cannot disarm the system.
How to disarm the Smart Security system on a Harley Davidson?
Also, with the battery disconnected in the fob I can keep the fob in one of the bike’s bags without worrying that it’s deactivated the alarm should someone get any ideas of rolling away with it. Every once in a while I use the PIN to disarm the system to help me remember what the PIN is.
How do you disarm a Harley Davidson alarm?
1. Select 5 digit code (1 thru 9) and record it on the wallet card in the owners manual. 2. With an assigned FOB present, turn IGN key ON – OFF – ON – OFF – ON 3. Press Left turn signal switch 2 times. 4. Press Right turn signal switch one time and release.
How to disable Harley Davidson factory security and use?
Learn how to use your unique 5 digit pin code to disable the electronic security that cuts your ignition out. This commonly unknown technique can save you from being stranded out on the road due to a dead key fob battery. Also transport your bike without having the fob within range to prevent the turn signals from flashing constantly. Loading…
What to do if your Harley Davidson battery goes dead?
The hardest part is remembering the pin number, IMHO. You should have gotten 2 key fobs with the bike. What I did was open one of the fobs and turned the battery around inside it so there’s no drain on it. This way if the main fob’s battery goes dead I simply turn the battery around in the other one and it’s good to go.
Why do the lights keep blinking on my Harley?
The lights keep blinking and the ignition won’t turn over. It has been in storage for a year. Submitted: 11 years ago. Category: Motorcycle If you have stored the bike it may have went into storage mode. Do dissable that, turn the ignition to on and the system should flash and go CRAZY! Double click the FOB and it should disarm.
Press left turn signal button 3 times. Press right turn signal button 1 time. Security light stops flashing and security system is disarmed. If you’ve changed the number, use your new number instead of 31313. Here’s a copy of the wallet alarm card if you have lost yours.
How to reset the security code on a Harley Davidson touring?
This article will show you how you can reset the security code, or override the fob on your Harley Davidson Touring. Turn the ignition switch located on the gas tank to “off,” and then turn it to “on.” Figure 1. Turn ignition switch. Press both turn signal switches together and keep them pressed.
How do you turn off the hazard lights on a Harley Davidson?
How to turn the hazard lights off on a Harley Davidson? First, find out the hazard switch from the dash. Then, you need to press the hazard lights’ turn on switch to start the hazard lights. The four turn signals should flash by now. Finally, press the switch again to turn off the hazard lights.
How to reset the Check Engine light on a Harley Davidson?
Run/Off switch. In this instance, just as any other time you work on your motorcycle, make sure your motorcycle is on a level surface and firmly on the kickstand. With the engine switch on the off position and the run/stop switch in the run position, push the odometer trip reset button and hold.
Press left turn signal button 3 times. Press right turn signal button 1 time. Security light stops flashing and security system is disarmed. If you’ve changed the number, use your new number instead of 31313. Here’s a copy of the wallet alarm card if you have lost yours.
How to turn the hazard lights off on a Harley Davidson? First, find out the hazard switch from the dash. Then, you need to press the hazard lights’ turn on switch to start the hazard lights. The four turn signals should flash by now. Finally, press the switch again to turn off the hazard lights.
This article will show you how you can reset the security code, or override the fob on your Harley Davidson Touring. Turn the ignition switch located on the gas tank to “off,” and then turn it to “on.” Figure 1. Turn ignition switch. Press both turn signal switches together and keep them pressed.
How do you reset Diag on Harley Davidson?
First, you need to switch off the ignition switch and run. Then push the odometer reset button or the toggle switch on the left control mount. Turn on the ignition switch and release the odometer reset button. The indicators and background lights should turn on and the word “diag” will appear.
How do you disarm an alarm with a key fob?
Turn the key to “Ignition.” Hold both turn signal switches until you receive confirmation. Enter the first number by pressing the left turn signal the same number of times as the digit. Press the right turn signal once. Repeat steps 3 and 4 until you have entered your PIN. Your key fob will automatically disarm your alarm.
Do you have to reset the factory alarm on a Harley Davidson?
Your Harley came with a key fob. If for some reason you do not have the key fob present, but you do have the key, you will need to have reset the factory alarm with your own personal identification number.
How to reset check engine light on Harley Davidson Softail?
Turn the ignition switch, which is located in the center of your gas tank, to the OFF position and then turn the Run/Stop switch, which is located on the right side of your handlebar, to the RUN position. Figure 2. Ignition on the tank and Run/Stop on right grip. Press the odometer’s reset button and keep it pressed.
How to reset the security system on a Harley Davidson touring?
With a proximity fob system, press the left turn signal switch three times and the right turn signal switch once. The blinkers will flash and the PIN should appear in the odometer window. With a push button fob, press the left turn signal three times, then the key fob twice, and the PIN will appear.
Is there a way to reset a factory car alarm?
Utilize common tricks. Factory car alarms have some simple reset protocols to help turn off an alarm. Most of the tricks rely on using the key in the door; simply put, a lot of factory car alarms have a door sensor, so working with the door might be the go-to for a quick fix.