Where do I hook up my Polaris heat shield?
I can’t remember what color wires hook up your helmet. Call a Polaris dealer and they should be able to tell you. Dom if you take the cener pad off of your steering column, you’ll find a few wires you can plug into under there. That’s what I did with my old XC and the helmet worked fine. I can’t remember what color wires hook up your helmet.
How do you mount a heated shield on a snowmobile?
Drill a Small hole in the console to permanently mount the socket. Nice and long 32″ wire on it. You can plug it into the AC connector with the yellow Wires. I strongly recommend against drawing from the “DC PWR” with the Red wire that has the same looking connector in the bundle.
Where do you plug in a heated shield?
Find a plug that looks like the attached. Probably yellow and brown wires. This is 12VAC for a heated shield. Polaris makes a RCA Plug Kit (p/n 2878780). It plugs directly into the sled’s wiring connector mentioned above.
Where is the wire for the Polaris heat shield?
I was poking around under the hood of my 2002 Polaris 600 XC SP Edge looking for a wire to splice into in order to hookup the wire for my helmet’s electric shield. I found a connector right behind the steering column with a two wire plug that looks like that used for a trailer. There is one female lead and one male lead.
How to hook up a Polaris 12 volt power outlet?
Connect the red/white wire of the wire harness (PN 2411352) to the center (hot) terminal of the power outlet. 5. Connect the brown wire of the wire harness to the outer (ground) terminal of the power outlet. 6. Connect the plug end of the wire harness to the empty plug on the main wire harness, located near
Where are the power plugs on a Polaris Rush?
Connect the plug end of the wire harness to the empty plug on the main wire harness, located near the steering post, on the steering hoop 7. Connect the plug end of the wire harness to the empty plug on the hood harness. 8. Reinstall foam under the hood. Rush Model Instructions Figure 2 Power Plug -2- 1. Lift hood. 2.
How much does a Polaris snowmobile shield cost?
Once it drops below 5 deg., having a heated shield makes it so much easier and safer to operate the sled. While these went in easy enough, their cost is extremely high for the product you receive. These should be a $10 item, not almost $26 each, uf-duh!