How to reset check engine light on Harley Davidson Sportster?

These are general throttle idle cables. Start by turning the ignition switch into the “OFF” position. Next, turn the run/stop switch into the “RUN” position. Press and hold the odometer reset button. Put the ignition switch into the “IGNITION” position and take your hand off the odometer reset button.

Is there a gas light on a Harley Davidson Sportster?

Gas light. Harley Sportster only got anti-lock brakes as an option in 2014, and it is such a simple system you may not even know your bike is equipped with it. If when you start the bike the ABS light light up, that means you have anti-lock brakes.

How does the brake light work on a Harley Davidson Sportster?

This article applies to the Harley Davidson Sportster (2000-2015). Two switches are open as well as closed by the brake hand and foot levers when you hit the brakes. With the switches closed, voltage is sent to the brake lamp through the wiring harness.

Are there any problems with my Harley Davidson Sportster?

Faulty Low Fuel Warning Light Some Harley Davidson Sportsters, mostly 2007 and 2008 are known to have a faulty low fuel warning light. Check with your dealer and you may be due a replacement under recall. Use your trip odometer to measure your true mileage and level of fuel consumption to see if it is accurate.

Why do the Lights Come On on my Harley Davidson?

Believe it or not, sometimes lights that come on do so because of a code that has to work itself out of the system, like after you go a certain number of miles, or after your engine has been started a certain number of times.

What does a red key light on a Harley Davidson mean?

If the security light (the key) stays on solid (not flashing) and the bike starts and runs, it means the bike has thrown a DTC. (diagnostic trouble code) It is essentially the equivalent of the “check engine” light on a car. The procedure for checking the code is posted in the electrical section.

What does red security light on speedometer mean?

Red Security Light on Speedometer. The red security light coming on means there is an issue somewhere. But, it might not necessarily mean a problem with your security system, especially if you don’t have one.

What does the Check Engine light mean on a Harley Davidson?

Check Engine Light. When the check engine light comes on, it indicates that something is happening or, in some cases, not happening. The easiest way to handle this is to do a “code check.”. The code will indicate what problem you’re facing.

When do the warning lights come on on a Harley Davidson?

Unfortunately, you can drive your brand new Harley off the lot and not get five miles down the road before a warning light comes on. Or, you could be a thousand miles from home when they start flashing. What do they mean?

What’s the best way to reset a check engine light?

In such a case, it is highly recommended to check the codes with a scanner instead. Switching the ignition on and off is also one method of hard reset without disconnecting batteries. Put the keys in your ignition and turn your ignition on and off consecutively after a second in each step.

Why do I need to Reset my ECM on my Harley Davidson Sportster?

This article applies to the Harley Sportster (2004-2015). There are two primary reasons to want to reset an ECU: the first applies to bringing back a stock tune, while the other is used to clear any saved diagnostic codes.

How do you reset the odometer on a Harley Davidson?

Turn off the ignition and click the “Run/Stop” switch to “Run.” Press and hold the odometer reset button. Turn the key to ignition and let go of the odometer reset button. The cluster will illuminate and the odometer will read the word “Diag.”

How can I Reset my Check Engine light?

Press and hold the odometer reset button. Put the ignition switch into the “IGNITION” position and take your hand off the odometer reset button. Check for “DIAG” to appear on your instrument cluster. Push the odometer reset button once more. Check for “PSSPt” to appear on your instrument cluster.

How do you clear ECM on Harley Davidson Sportster?

Clearing the codes, one you have recorded them, is just as easy with a few more presses of the button: Hold the button for five seconds with a code displayed until the display says “clear.” To move to the next module, just push and release the button and it will start flashing. Once finished, turn the ignition off.

How to get the trouble code on a Harley Davidson Sportster?

If a module has a “Y” next to it, a trouble code is present. Press and hold the odometer button for five seconds and the trouble code will be displayed. Record the code for later. Figure 1. The trip button on 2014 and newer Sportsters.

What is the p0374 code on a Harley Davidson Sportster?

Press and release the odometer button to return to the module selection menu. Turn off the ignition to exit the menu. The P0374 code is notorious on the 2004 and later Sportsters. This code relates to the crank shaft position sensor.

What do you need to know about a Harley Davidson Sportster?

This article applies to the Harley Davidson Sportster. The Harley-Davidson Sportster is a well-engineered motorcycle that is manufactured to quickly and effectively alert you to any potential or probing issues (mechanical or otherwise) related to the function of your motorcycle.

How to fix speedometer on Harley Davidson Sportster?

Press the button a number of times until the second S is flashing and you are in the speedometer module. Press as well as hold the button for five seconds and an error code will be displayed or it will show NONE. Use the displayed fault codes and your factory service manual to find what needs to be fixed. Figure 4.

How to check check engine light on Harley Davidson Sportster?

Whenever you see a check engine light displayed on your speedometer, take a couple minutes to find out which code (s) are present. If you are working on a 2013 or earlier Sportster, skip to Step 3. This procedure applies to the 2014 and later Sportsters: Press and hold the trip button on the left handlebar control cluster.

Where do you start on a Harley Davidson Sportster?

Always start at the fuse box when your Sportster experiences an electrical problem. This article applies to the Harley Davidson Sportster (2000-2015). Fuses, relays, and circuits breakers: they’re all circuit protection devices that can be found inside your Sportster’s fuse box, depending on its year.

What happens to the fuse on a Harley Davidson Sportster?

When a wire finds a path to ground that’s bypassing the device it’s powering, a shorter circuit is made. This generates heat and melts the metal strip inside the fuse. Without the right fuse (amp rating on top of the fuse), a fire can occur.

What are relays on a Harley Davidson Sportster?

Figure 2. Testing a fuse with a multimeter. Relays are another type of circuit protection device. They use an internal magnetic switch to allow a smaller current to control a larger one. Looking at Figure 3, you can see connections 85 and 86 complete the circuit from the switch ground to the switch.

Are there turn signals on a Harley Davidson Sportster?

Plus, we have Harley-Davidson Sportster front turn signals (and rear signals) in L.E.D or traditional bulbs. You can trust all our top manufacturers like Kuryakyn, J&P, Arlen Ness, Custom Dynamics, BikeMaster, New Rage Cycles, Accutronix, and more. Remember, we have all kinds of Harley-Davidson Sportster lights to keep your bike shining bright.

Why are the lights on my Harley not working?

With the road lights on the head light and road lights go on and off. Road lights off the head light stays on. With road lights on the headlight and road lights go on and off. Road lights off the head light stays on. In case you’re having this issue too…

Navigation