How do you adjust the position of the headlight?
Turn on the headlight switch. (Low Beam Position) 1. Adjust headlights so that main axis of light is parallel to center line of the body and is aligned with point “P” shown in the illustration. 2. Dotted lines in the illustration show the center of headlights. Horizontal center line of headlights from ground: 35.6 in. (904 mm).
How to adjust headlight beam on Hyundai Tucson?
Draw a vertical line (through the center of each headlight beam pattern) and a horizontal line (through the center of each headlight beam pattern) on the aiming screen. And then, draw a parallel line at 0.8 in. (21 mm) under the horizontal line.
When to adjust horizontal aiming on a Hyundai?
Horizontal aiming must be adjusted by an authorized Hyundai dealer to avoid incorrect alignment that will reduce the effectiveness of your headlights. If the vehicle has had front body repair and the headlight assembly has been replaced, the headlight aiming should be checked using an aiming chart as shown in the illustration.
How big is the center line of headlights?
1. Adjust headlights so that main axis of light is parallel to center line of the body and is aligned with point “P” shown in the illustration. 2. Dotted lines in the illustration show the center of headlights. Horizontal center line of headlights from ground: 35.6 in. (904 mm). Distance between each headlight center: 53.4 in. (1,356 mm).
Where to put the headlights on a Hyundai Elantra?
Aim both headlights so they are about two inches below their corresponding horizontal strips of tape and two inches inward from their corresponding vertical strips. Park your Hyundai Elantra 30 feet away from a garage door or a wall so that the headlights are facing the wall or garage.
How do you adjust the headlights on a Hyundai?
Turn your low beam headlights on and check the aim against the marks on the wall. Use a Philips or Torx screwdriver to twist the screws. Adjust each headlight until the beams hit the marks on the wall. Ideally, you want the highest intensity zone of the lights to be slightly lower and to the right of the marks.
Horizontal aiming must be adjusted by an authorized Hyundai dealer to avoid incorrect alignment that will reduce the effectiveness of your headlights. If the vehicle has had front body repair and the headlight assembly has been replaced, the headlight aiming should be checked using an aiming chart as shown in the illustration.
What should I use to adjust the aiming of my headlights?
Adjust each cut-off line of the low beam to the parallel line with a phillips screwdriver – VERTICAL AIMING. Never attempt to adjust the horizontal alignment of your headlights. Horizontal aiming must be adjusted by an authorized Hyundai dealer to avoid incorrect alignment that will reduce the effectiveness of your headlights.