Why is my Honda Foreman fan not working?
If you unplug the fan you can test that side of the circuit to see if you have a power. I presume this is the same as the rubicon which introduces the ground to the circuit when the temperature reaches the threshold.
Why is my Honda radiator fan not working?
If the radiator fan begins working, this is an indication that the fan relay is bad. If the fan switch relay is giving off the appropriate readings and is in working condition, move on to the next step. The thermo switch (also called the cooling fan switch) sends a signal to the cooling fan, so the fan turns on if the coolant gets too hot.
How do you test a Honda cooling fan?
Take the single white wire and a few inches out of the box is a bullet connector. Take it apart there and put a ground wire in there and plug it back together. Then when the key is on the fan will run. To test the fan ground the blue wire going to the oil thermosensor ..
How much does it cost to replace a Honda radiator fan?
Radiator fan testing points. If the radiator fan is in working condition, move on to the next step. The ECT sensor monitors the coolant temperature, and allows the fan to turn on if the coolant is too hot. If this sensor is faulty, a replacement costs around $25 to $45.
What to do if your Honda cooling fan is not working?
There is a box behind the front right tire on the frame with 2 single wires (White and ?) with a connector with several wires in it coming out the top of the box. Take the single white wire and a few inches out of the box is a bullet connector. Take it apart there and put a ground wire in there and plug it back together.
Why does my Honda Foreman 450 fan never come on?
As far as the the light coming on it has never came on. my foreman 450 fan never comes on if the weather is less then 80 degrees. Check the fuses first and formost. If you unplug the fan you can test that side of the circuit to see if you have a power.
How can I hot wire my Honda fan?
hot wire the fan (undo the plug from the fan and have 2 wires from the battery to the plug leads of the fan) if you cant find the problem you can just hook the fan to a toggle switch ,and just put it on when you need it Hot wire fan like rich said, that will narrow down that the fan motor is good, then just start tracing and ohming wires.