How to replace a burnt out turn signal on a Lucerne?
This video shows you how to replace a burnt out rear turn signal on your 2008 Buick Lucerne. We recommend that you change both the driver and passenger side bulbs at the same time on your Lucerne as they get dimmer over time and if one is out, then the other one is likely to burn out soon.
Where do I replace the light bulbs in my car?
In order to replace your bulbs, you had to access the back of the turn signal housings. Also in this location, you’ll find the plugs that connect your tail lights and front turn signals to the car’s electrical system. Unplug these and plug them back in one at a time.
What to do if your turn signal bulb burns out?
Turn your hazard lights on and check the front of your Lucerne and then the back, whichever side is not lighting up is the side with the burnt out bulb. When changing the turn signal bulb in your Lucerne, be careful not to touch the glass portion of the bulb with your fingers as this will cause the bulb to burn out prematurely.
Where are the bulbs on a turn signal?
Tracking down a loose wire or a ground that isn’t grounding can be a pain in the neck. But let’s get to it. In order to replace your bulbs, you had to access the back of the turn signal housings. Also in this location, you’ll find the plugs that connect your tail lights and front turn signals to the car’s electrical system.
How to replace the tail light in a Buick LeSabre?
Manipulate the trunk lid at chest level and gently pull the rear taillight assembly slightly away from the trunk lid. Locate the burned out bulb sockets and then remove the bulbs. Insert the new bulbs into the socket and test by turning on the lights before reassembling.
How do you replace brake light on LeSabre?
Pull the brake light assembly outward from the back of the LeSabre. Locate the socket of the burned out bulb and then turn counter clockwise 1/4-inch to release it from the assembly. Remove the old bulb from the socket and replace with a new one. Test the light before reassembling. To replace the assembly, reverse the procedure.
Where are the nuts on a Buick LeSabre?
Open the trunk of the Buick LeSabre. Locate 7 nuts underneath the trunk lid (3 on each end of the trunk lid and 1 in the middle). Remove each one using a nut driver.