How do you set the timing on a Harley Davidson Shovelhead?
How to Set the Timing on Shovelhead Points
- Remove the spark plugs, the timing port plug (on the left side of the engine case between the cylinders) and the timing cover (on the right side of the engine case).
- Place your thumb over the front-cylinder spark plug hole and kick the engine over slowly with the kick starter.
How to check ignition timing on a Harley Davidson?
At every 5000 mile (8000 km) service interval. Check for proper RPM and ignition timing as follows: 1. See Figure 0. Thread TIMING MARK VIEW PLUG (Part No. HD 96295-65D) into timing inspection hole. Be sure view plug does not touch flywheel. 1a. See Figure 1. Locate the proper timing marks for your engine.
Where is the thread timing mark on a Harley Davidson?
Thread TIMING MARK VIEW PLUG (Part No. HD 96295-65D) into timing inspection hole. Be sure view plug does not touch flywheel. 1a. See Figure 1. Locate the proper timing marks for your engine.
What’s the timing range on a Harley Davidson Sportster?
Sportster: Timing Range: 0-35 : 0-45: Timing at Start: 5 : Timing at adjust RPM: 35 : Adjust RPM: 1500: 1650-1950
Where do I find the timing mark on my engine?
See Figure 1. Locate the proper timing marks for your engine. If the shop manual is not available, remove spark plugs, turn engine until front piston is at TDC on compression stroke and identify TDC mark on the flywheel. 2. Connect leads of INDUCTIVE TIMING LIGHT to front spark plug cable, to battery positive terminal and to ground. 3.
How do you check the ignition timing on a Harley Davidson?
You can check it with a Timing Light. On the right side of engine cases,below where the 2 cylinders meet, is a large Allen screw. Remove that. Remove your timing cover, RH side of engine on gear cover. This will expose your Ign. plate. Hook the light to your front spark plug wire and point the light at the hole from the allen screw.
Thread TIMING MARK VIEW PLUG (Part No. HD 96295-65D) into timing inspection hole. Be sure view plug does not touch flywheel. 1a. See Figure 1. Locate the proper timing marks for your engine.
How do you time a Harley Davidson engine?
Point the timing light into the timing inspection hole. If the ignition is properly timed, the timing bar will align with the circular timing reference mark. The reference marks on a correctly timed engine will appear as a vertical bar through the center of the circle.
Why is timing important on a Harley Davidson?
Setting the timing correctly keeps your motorcycle running smoothly and efficiently. Maladjusted timing may result in sluggish performance, poor fuel economy and possible damage to internal engine components. Setting the timing is relatively easy and ensures the maximum life from the engine.