How do you adjust the headlights on a 2015 Nissan Altima?
It is really easy to adjust the 2015 Nissan Altima headlights and You can do it with a screwdriver to tighten or loosen each headlight’s rear adjustment screw. In order to lift the headlight beam and counterclockwise to lower the beam, You can spin the screw clockwise.
How do you adjust the headlights on a 2009 Nissan Altima?
First loosen the adjusting screw all the way and then make adjustment by tightening the screw.
- Turn headlamp low beam on.
- Use adjusting screws to perform aiming adjustment.
How do you adjust the headlight on an Altima?
Walk up to the wall with the headlights still on and mark the exact center of each headlight beam, determined by the small circular disc that will appear in the illumination pattern of each light. Note that the Altima has very little if any horizontal light adjustment capabilities.
What’s the best way to adjust a car’s headlights?
With the vehicle on level ground, park about six feet away from a wall or garage door and turn on the headlights. Use masking tape to mark the center line of where the low beams project onto the wall. Some vehicles will have a target or cross-hair in the center of the headlight, which is handy as a reference for this horizontal line.
Where do you Put Your Headlights on the aiming wall?
The front of your headlights should be 25 feet from the aiming wall chart you’ve created. Turn on your lights: Turn off your garage lights or any other light source and turn on your vehicle’s headlights to compare their alignment to the guide. If you’re adjusting your headlights outside, you’ll need to do this work at night.
How do you find the axis of a headlight?
Find the headlight axis: With a dry erase marker, draw a small dot in the center of each headlight. This is the headlight axis. Make sure to mark the center of the regular lights, not the high beams.