How much torque does a CR500 have?
| Honda CR 500 Engine and Transmission Technical Data | |
|---|---|
| Maximum power – Output – Horsepower | 69.00 HP (50.4 kW) @ 8500 RPM |
| Maximum torque | – |
| Engine Maximum RPM | – |
| Cooling system | Liquid |
What year CR500 had the most HP?
The Honda CR500R was a single cylinder, two-stroke All motorcycle produced by Honda between 1984 and 2001. Claimed horsepower was 67.59 HP (50.4 KW) @ 8500 RPM….
| Honda CR500 | |
|---|---|
| Engine | 500cc Two-stroke single cylinder |
| Top Speed | 92 mph |
| Horsepower | 67.59 HP (50.4 KW) @ 8500RPM |
| Fuel System | carburetor. keihin 38mm flat slide |
How much HP is a CR500?
Honda CR500 Horsepower was 67.59 HP. Kick Start services added This Motorcycle. The Honda CR500 is capable of reaching a maximum top speed of 92 mph(150 kph).
What is the most powerful CR500?
Ping King – 1986 Honda CR500. When first released, Honda’s CR500 was its most powerful MXer ever produced, though that power was wildly difficult to tame.
Do you have to torque head bolts on Honda?
Additionally, when tightening cylinder and head bolts/nuts you must use the correct torque spec and torque them in the proper pattern. If you own a Honda and a Kawasaki keep in mind the torque and torque patterns vary between manufacturers so don’t think Honda when working on Green.
How much torque does a Honda XR 250 have?
These bolts have different torque values according to diameter. The 10mm cylinder head bolts torque to 27 to 31 foot-pounds; the 6mm head bolt on the cover and cylinder torque to 7 to10 foot-pounds. The 8mm cylinder cover bolt torques to 15 to 20 foot-pounds. Honda’s XR250R has a fuel capacity of 2.38 gallons with a 0.53-gallon reserve capacity.
What are the torque specs on a Honda CRF150R?
Anybody knows what is the cylinder head torque specs for the 08 crf150r? For 08, from Honda Service Manual: Cyl. Head Nut: 21 ft-lb (oil the seating surface) Cyl. Head Mounting Bolt (no torque given) Cyl. Head Cover bolt 7 ft-lb Cyl. Head Nut: 21 ft-lb (oil the seating surface)
How big is the head nut on a Honda 08?
For 08, from Honda Service Manual: Cyl. Head Nut: 21 ft-lb (oil the seating surface) Cyl. Head Mounting Bolt (no torque given) Cyl. Head Cover bolt 7 ft-lb Cyl. Head Nut: 21 ft-lb (oil the seating surface) Cyl. Head Mounting Bolt (no torque given) Cyl. Head Cover bolt 7 ft-lb Thanks appreciate it.
Additionally, when tightening cylinder and head bolts/nuts you must use the correct torque spec and torque them in the proper pattern. If you own a Honda and a Kawasaki keep in mind the torque and torque patterns vary between manufacturers so don’t think Honda when working on Green.
How big is a Honda CR500 dirt bike?
The bike weighed just 238.1 pounds (108.0 Kg). The Honda CR500 is a large displacement 500cc motocross / enduro dirtbike made by Honda since 1984. 1984 1984 Honda CR500R
What should the torque be on a dirt bike?
Always check the owner’s manual for specific torque specifications for the make, model and year of your dirt bike. Mechanic’s Note: Most manufacturers recommend replacing all head bolts, head nuts, head studs, cylinder nuts, cylinder bolts, and cylinder studs instead of reusing the old ones.
How big is the fuel tank on a Honda cr500r?
The front suspension was a showa 46mm leading axle usd fork with adjustable compression/rebound dampening while the rear was equipped with a showa prolink with adjustable compression/rebound dampening. The CR500E was fitted with a 2.38 Gallon (9.00 Liters) fuel tank. The bike weighed just 238.1 pounds (108.0 Kg).