What causes choke on Honda lawn mower to open?
When the engine starts up, the engine heat works to warm the wax cylinder to cause an expansion of the wax that pushes the piston out. This would force the choke control to move in the opposite direction for the choke plate to open; thus, more air would enter into the engine.
Is there a warranty on a Honda lawn mower choke plate?
The choke plate needs to be completely opened and closed to confirm the proper functioning of the Autochoke. Honda mowers have a warranty against defective Autochokes where the linkage and wax cylinder could be replaced for free through an authorized Honda dealer.
Why does my Honda lawn mower not start up?
An improper malfunction may cause the lawnmower to become impossible or quite challenging to start up. There are various potential causes of this startup issue which could include clogged carburetors, bad spark plug or stale gasoline as well as blocked air filters besides a malfunctioning Autochoke.
What to do if choke on scooter wont start?
If the automatic choke is OK, the starter cranks the engine, there’s gas and there’s a spark then there may be an engine problem. You need to check the cylinder compression. You need a compression tester to do this. It screws in instead of the spark plug and measures cylinder pressure.
What should I do if my motorcycle won’t start?
If the reading stays steady, your battery is good to go—and your motorcycle likely has another problem (or a few problems). Fortunately, there are other troubleshooting means that can help determine why your bike won’t start.
What should I do if my Honda mower choke is not working?
Then the engine should run for 3 minutes at least to be fully warmed before shutting it to ensure a fully opened choke plate. The engine should be allowed to cool for half an hour before rechecking the choke plate condition. The choke plate needs to be completely opened and closed to confirm the proper functioning of the Autochoke.
What does it mean when your ATV won’t start?
The solenoid should make an audible “clicking” sound each time you hit the starter. If it does, you know it is getting power, and the problem is likely with the solenoid itself or possibly the starter.