How do you take the seat off a Suzuki GSXR 1000?
Insert the ignition key into the seat-release latch under the left side of the motorcycle’s tail fairing, directly below the passenger seat. Turn the key counterclockwise to release the latch. Lift the front of the passenger seat upward, and then pull the seat forward until you can remove it.
How do you remove the seat on a Suzuki Marauder?
Suzuki Marauder Seat Removal
- Insert the Marauder’s ignition key into the seat lock, and turn the key to unlock it.
- Look carefully at the rear seat bolt, which sits just behind the rear seat.
- Pull the rear seat strap forward, then off the rear seat.
- Pull the rear seat up and from the Marauder.
Where is the front seat on a Suzuki Intruder?
Pull the rear seat up and from the Marauder. After doing so, you will reveal two screws at the rear of the front seat. Remove these screws. Lift up the front seat, and undo the tab near the full tank to detach the front seat. “Suzuki Intruder, Marauder, Volusia and Boulevard: ’85 to ’06”; Alan Ahlstrand; Haynes North America; 2006
How do you remove a seat on a motorcycle?
You need either a socket wrench or a screwdriver with an appropriate tip to remove this bolt, depending on whether you bought the motorcycle used and the previous owner customized the seat. Pull the rear seat strap forward, then off the rear seat. Pull the rear seat up and from the Marauder.
How do you remove the rider seat on a Honda Accord?
Turn the key counterclockwise to release the latch. Lift the front of the passenger seat upward, and then pull the seat forward until you can remove it. Lift up the rear corners of the rider seat to reveal the mounting bolts. Remove the bolts with a 10 mm socket and ratchet.
Do you need to replace the seat on a Suzuki Marauder?
The seat of your Suzuki Marauder can undergo a great deal of wear and tear if you ride the motorcycle frequently. You can repair seams, cracks, rips and splits in a seat, but a time will come when you must remove and replace it—especially with older motorcycles.
How do you remove the seat on a Suzuki DR200?
In addition to the screws on each side, there’s plastic tongue underneath towards the front of the seat. That plastic tongue slides under a metal bracket and holds the front of the seat down. Once you take off the hex-head screws, just lift the back of the seat up and slide it to the rear about an inch. The seat is now off.
How do you remove a rider seat from a motorcycle?
Remove the bolts on both sides of the rider seat, just below the fuel tank, using a 4 mm Allen wrench. Lift the front of the seat upward, and then pull it toward the front of the motorcycle until the mounting tabs on the rear of the seat disengage from the seat rails.
Turn the key counterclockwise to release the latch. Lift the front of the passenger seat upward, and then pull the seat forward until you can remove it. Lift up the rear corners of the rider seat to reveal the mounting bolts. Remove the bolts with a 10 mm socket and ratchet.
How do you remove the seat on a GSX Rs?
Early models used a simple keyed latch to remove the seat; newer GSX-Rs use the same latch for the passenger seat but bolt the rider seat into place. Insert the ignition key into the seat-release latch under the left side of the motorcycle’s tail fairing, directly below the passenger seat. Turn the key counterclockwise to release the latch.