How to reset the timing belt warning indicator?
Timing Belt Warning Indicator Reset Procedure. For LandCruiser UZJ100, HZJ105 and HDJ100. a) With ignition turned ON, using the trip switch (select/reset button) change the display to ODO, and turn the ignition OFF. b) While pressing the trip switch, turn the ignition switch ON and hold it for 5 seconds.
Why does the seat belt not on warning light not turn off?
Sometimes, the seatbelt switch can get stuck or broken and the light won’t turn off. Clean out the buckle or replace it, if necessary, and everything should return to normal. Is it safe to drive with the seat belt not on warning light on?
How to reset the belt light on a Land Cruiser?
1. T-BELT MODE DISPLAY a) With ignition turned ON, using the trip switch (select/reset button) change the display to ODO, and turn the ignition OFF b) While pressing the trip switch, turn the ignition switch ON and hold it for 5 seconds.
How do you reset the D4D T Belt Light?
1. Switch ignition on and select “odo” 2. Switch ign. off 3. Press selector and hold for 5 seconds, don’t let go 4. Switch ign. on and hold for another 10 seconds 5. Release selector and press once, number 15 will apear 6. Press selector 15 times up to number 15 7. Press and hold selector untill odo re-apears, let go 8.
How to reset the T Belt warning light?
T-BELT WARNING RESET COMPLETION a) After setting the replacement setting value, hold the trip switch ON for more than 5 seconds then release the switch. b) Check that the display has now changed back to ODO and that the warning light has gone off when the engine is started.
Sometimes, the seatbelt switch can get stuck or broken and the light won’t turn off. Clean out the buckle or replace it, if necessary, and everything should return to normal. Is it safe to drive with the seat belt not on warning light on?
When to reset belt light on Kawasaki ATV?
However, the belt light may stay on after flipping the switch back to “ON”, or it may have come on automatically at 100 hours to get you to return the machine to the dealer for inspection even though the belt switch is not tripped. The following procedures will reset the light if the belt switch is not tripped.
How do you reset the belt on a landcruiser?
1. T-BELT MODE DISPLAY b) While pressing the trip switch, turn the ignition switch ON and hold it for 5 seconds. c) Release the trip switch, then press the switch again within 5 seconds. d) The digital display should change to T-belt mode. The initial display “15” (0,000km) is displayed (ie. 150,000km). 2. REWRITING REPLACEMENT VALUES