Is the Arctic Cat 550h1 EFI side by side?
2009 Arctic cat Prowler 550H1… 2009 Arctic cat Prowler 550H1 EFi side by side flatbed. Will not start! No spark No fuel spray from injector. Fuses good, was running and missfiring and died and would not restart. Replaced plug and injector. no difference. No codes being shown on dash. Fuel pump runs and pumps fuel.
How to fix an EFI machine that is not working?
Once removed, you can get to the bolt head on the backside, you cannot do it from the front without removing the panel bolts, it has no lockwasher and will just turn. Once you have the panel off, position the coil straight and tighten down the nut….you may want to try slipping a thin lockwasher under the nut, but mine hasn’t come loose.
How to test Arctic Cat Prowler 550h1 EFI?
1. Make sure the ignition switch is in the OFF position; then remove the seats. 2. Locate the diagnostic plug next to the PDM; then remove the black rubber cap. 3. Connect the Test Plug to the diagnostic plug. 4. Turn the ignition switch to the ON position and read the error code on the LCD. Let me know what you find. I don’t have a test Plug.
What’s the EFI code on my Arctic Cat?
Has EFI code. Hi guys I’m new here I live in Colorado and I have a 2009 atric cat 550 h1. It has a EFI code on screen. I have good fuel pressure and a new spark plug. It will turn over just fine but no fire.
2009 Arctic cat Prowler 550H1… 2009 Arctic cat Prowler 550H1 EFi side by side flatbed. Will not start! No spark No fuel spray from injector. Fuses good, was running and missfiring and died and would not restart. Replaced plug and injector. no difference. No codes being shown on dash. Fuel pump runs and pumps fuel.
1. Make sure the ignition switch is in the OFF position; then remove the seats. 2. Locate the diagnostic plug next to the PDM; then remove the black rubber cap. 3. Connect the Test Plug to the diagnostic plug. 4. Turn the ignition switch to the ON position and read the error code on the LCD. Let me know what you find. I don’t have a test Plug.
How to get error code on Arctic Cat Prowler?
If a sensor fails or an out-of-tolerance signal is sensed by the ECU, an error code will be generated by the ECU. This will result in the analog needle swinging full scale. The EFI icon will flash. 1. Make sure the ignition switch is in the OFF position; then remove the seats.
Has EFI code. Hi guys I’m new here I live in Colorado and I have a 2009 atric cat 550 h1. It has a EFI code on screen. I have good fuel pressure and a new spark plug. It will turn over just fine but no fire.
If a sensor fails or an out-of-tolerance signal is sensed by the ECU, an error code will be generated by the ECU. This will result in the analog needle swinging full scale. The EFI icon will flash. 1. Make sure the ignition switch is in the OFF position; then remove the seats.